Command: Interface Ethernet; Command: Interface Port-Channel - Dell PowerConnect 2816 User Manual

Default value
This command has no default setting.

Command: interface ethernet

To configure an interface type and enter interface configuration mode, use the interface ethernet global
configuration command.
interface
interface ethernet
Syntax Description
interface
• — The full syntax is:
Parameters range
interface
• — Valid Ethernet port.
Command Modes
Global Configuration
Example
Console(config)# interface ethernet g1
Console(config-if)#

Command: interface port-channel

To configure a port-channel type and enter port-channel configuration mode, use the
channel
global configuration command.
interface port-channel
Syntax Description
port-channel-number
•
Parameters range
port-channel-number
•
Command Modes
Global configuration
Usage Guidelines
Commands under the interface range context are executed independently on each interface in the range:
If the command returns an error on one of the interfaces, it will not stop the execution of the command
on other interfaces.
port
.
port-channel-number
— Port channel index.
— Valid port channel
Dell PowerConnect 28xx Systems User Guide
interface port-
165