Manually Allocating IP Addresses (Static Hosts)
The Static Hosts page is used to manually allocate IP addresses to network hosts. To open the Static
Hosts page, click System
Figure 6-28. Static Hosts
Host Name — Indicates the host pool name, which can be a string of symbols and an integer (for
•
example, piy4). The range is up to 32 characters.
•
IP Address — Specifies the IP address that was statically assigned to the host.
•
Network Mask — Specifies the pool's network mask.
•
Prefix Length — Specifies the number of bits that comprise the address prefix.
•
Client Identifier — A unique identification of the client specified in dotted hexadecimal notation,
e.g., 01b6.0819.6811.72.
•
MAC Address — Specifies the MAC Address of DHCP static host.
•
Client Name — Specifies the name of the client, using a standard set of ASCII characters. The client
name must not include the domain name. The range is up to 32 characters.
•
Default Router — Specifies the default router for the DHCP static host.
•
Domain Name Server — Specifies the DNS server available to the DHCP client.
•
Domain Name — Specifies the domain name for a DHCP static host. The domain name may contain
up to 32 characters.
DHCP Server
Static Hosts in the tree view.
→
→
Update with your book title
89