Installation Points To Remember - Auto Mate 415 Installation Manual

Hide thumbs

Table of Contents

Primary

Harness

Plug H1

2-pin

micro

LED

plug

DRW-101

2-pin-mini blue

valet/program

plug

4-pin

optional

sensor plug

Before beginning the installation:

• Check with the customer on Status LED location.

• Use seat and fender covers to protect the vehicle.

• Remove the domelight fuse. This prevents accidentally draining the battery.

• Roll down a window to avoid being locked out of the car.

• Do not disconnect the battery if the vehicle has an anti-theft coded radio. If equipped with an air bag,

avoid disconnecting the battery if possible.

• Remove necessary under-dash trim panels to provide access for mounting the system's components.

IMPORTANT! Please read this entire installation guide before beginning the installation. The installa-

IMPORTANT! Many airbag systems will display a diagnostic code through their warning light after

After the install:

• Test all functions. The "Using Your System" section of the Owner's Guide is very helpful when testing.

• When testing, don't forget that this system is equipped with Nuisance Prevention

circuitry can bypass both instant trigger zones, making them seem to stop working.

• Carefully reassemble the under-dash trim panels.

• Inspect the engine compartment for tools that may have been left behind.

5-pin

auxiliary

plug