Basic Set-Up Of The Twinloc Remote Control - Scott GENIUS LT Manual

BASIC SET-UP OF THE TWINLOC
REMOTE CONTROL OF EQUALIZER 3 SHOCK
To ensure perfect function of the Equalizer 3 shock it is very important to follow the
steps shown below exactly.
Please note that the following explanation shows a complete exchange/replacement
of the cable, so in case you just want to double check e.g. the cable tension please see
only steps 1, 7, 8 and 9.
Important:
For all following actions the TWINLOC lever needs to be in "ALL TRAVEL-MODE"
position!
14
2011 SCOTT BIKE OWNERS MANUAL
Remove the cap of the cable
1
housing window on the shock
by turning the screws counter
clockwise using a 1.5 mm allen key
remove the end cap of the cable
2
with pliers
loosen the cable fixing screw (S11)
3
by turning it counter clockwise
with a 2mm allen key.
remove the old cable by pushing/
4
pulling it out from the TWINLOC
lever
insert a new cable via lever hole
5
and cable housing and push it
into the shock as shown.
15