Advertisement
Quick Links
Advertisement
Related Manuals for Vacon IP54 KIT
Summary of Contents for Vacon IP54 KIT
- Page 1 IP54 kit...
- Page 2 2 • vacon INDEX General Vacon IP54 kit contents FR4 (Type designation code: NXIP54FR4) FR5 (Type designation code: NXIP54FR5) FR6 (Type designation code: NXIP54FR6) Installation Information sticker Tel. +358 (0)201 2121 • Fax +358 (0)201 212 205...
- Page 3 The contents of the IP54 kits for different frames are shown in the following pictures. FR4 (Type designation code: NXIP54FR4) Figure 1. Contents of IP54 kit for FR4 IP54 enclosure for FR4 Plastic sealing IP54 cable cover with fan...
- Page 4 4 • vacon Vacon IP54 kit contents FR5 (Type designation code: NXIP54FR5) Figure 2. Contents of IP54 kit for FR5 IP54 enclosure for FR5 Rubber sealings IP54 cable cover with fan Screws (4x10) Cable entry flange with rubber grommets Warning sticker...
- Page 5 • 5 INSTALLATION These instructions guide you through the installation of the IP54 kit that you have purchased for your FR4, FR5 or FR6 size frequency converter enclosure class IP21. NOTE: If you have purchased your converter before March 2004, follow the installation instructions under 3.2.
- Page 6 6 • vacon Installation 9. Take the IP54 cable cover and 8. Remove the power cable cover 10. Use the attached screws to fix and detach the grounding rack connect the fan power cable to the IP54 cable cover with fan and connector marked with 'FAN' the grounding rack.
- Page 7 8. Remove the power cable cover 9. Use the attached screws to fix 10. Re-attach the grounding rack and detach the grounding rack. the IP54 cable cover with fan (#2). that you detached at step 8. 24-hour support +358 (0)40 837 1150 • Email: vacon@vacon.com...
- Page 8 8 • vacon Installation 11. Attach the fan cable anchors 12. Connect the fan cables to ter- 13. Fix the IP54 cable entry flange (#6) as shown in the picture and minals #6 (red) and #7 (black) of placing it with the old grommets...
- Page 9 (1) and mark the installation date (2) on the sticker. Finally, attach the sticker on your drive. Drive modified : Option board: NXOPT....Date:....in slot: IP54 upgrade/Collar Date:....EMC level m odified: H to T / T to H Date:....24-hour support +358 (0)40 837 1150 • Email: vacon@vacon.com...
- Page 10 Vaasa Helsinki Rotatek Finland Oy Vacon Oyj (Headquarters and Production) Vacon Oyj Laserkatu 6, 53850 Lappeenranta Runsorintie 7, 65380 Vaasa Äyritie 12, 01510 Vantaa tel. +358 (0)5 6243 870 firstname.lastname@vacon.com tel. +358 (0)201 212 600 fax: +358 (0)5 6243 871 tel.
Need help?
Do you have a question about the IP54 KIT and is the answer not in the manual?
Questions and answers