2.1.2 Identity Vault Server
The Identity Vault server must be running Windows* 2003 Server SP1 or later.
2.1.3 User Enrollment/Biometric Capture Station
The software being utilized for the User Enrollment Biometric Capture station for this release is
Honeywell SmartPlus Enrollment software. Make sure this software is installed on the machine you
are designating for this function.
For information on the minimum requirements for the Honeywell SmartPlus Enrollment software,
see the installation documentation provided by Honeywell.
2.1.4 Card Management System
The software being utilized for the Card Management System for this release is the ActivIdentity
CMS 4.0.3 software. Make sure this software is installed on the machine you are designating for this
function.
IMPORTANT: Patch # FISX0709018 is required and must be applied to ActivIdentity CMS 4.0.3.
For information on the minimum requirements for the ActivIdentity CMS software, see the
installation documentation provided by ActivIdentity.
NOTE: For this release, ActivIdentity CMS is only supported on the Windows platform with
Microsoft* Active Directory.*
2.1.5 Physical Access Control System
The software being utilized for the Physical Access Control System for this release is the Honeywell
SmartPlus Integration software. Make sure this software is installed on the machine you are
designating for this function.
For information on the minimum requirements for the Honeywell SmartPlus Integration software,
see the installation documentation provided by Honeywell.
2.1.6 User Application Server
The Identity Vault server must be running Windows 2003 Server SP1 or later.
2.1.7 Workstations
Each workstation must meet the following minimum requirements:
Windows XP SP2 or later installed.
PIV card reader is connected and PIV card middleware is installed.
Use supported PIV cards.
18
Identity Assurance Solution 3.0.2 Installation Guide