Configuring The Poa For The New Post Office; Installing And Starting The New Poa - Novell GROUPWISE 7 - POST OFFICES Manual

11.3.2 Configuring the POA for the New Post Office

Although there are many POA settings, the default settings are sufficient to get your post office
operational. However, there are a few important settings that you can conveniently modify before
you install the agent software.
1 In ConsoleOne, double-click the new Post Office object.
2 Right-click the POA object, then click Properties to display the POA Identification page.
3 Provide a description for the POA.
4 Select the platform where the POA will run
5 If you have created the post office in a clustered environment, follow the instructions in the
6 For more POA configuration options, see
7 Click OK to save the POA configuration information.

11.3.3 Installing and Starting the New POA

To install the POA for the new post office to the location recorded under
the instructions in
170 GroupWise 7 Administration Guide
The description displays on the POA agent console as the POA runs.
appropriate section of the
Meet Post Office Needs," on page
"Installing GroupWise
(worksheet item
GroupWise 7 Interoperability
Section 12.10, "Changing POA Configuration to
199.
Agents" in the
12).
Guide.
worksheet item
GroupWise 7 Installation
11, follow
Guide.