Moving A Post Office - Novell GROUPWISE 7 - POST OFFICES Manual

can continue to access the post office; after they exit, they cannot access the post office again until
the post office is enabled.
A post office must be disabled if you are rebuilding the post office database (wphost.db). You might
also want to disable a post office when you are doing a complete GroupWise system backup. That
ensures that all data is consistent at the time of the backup.
1 In ConsoleOne, browse to and right-click the Post Office object, then click Properties.
2 Click GroupWise > Client Access Settings to display the Client Access Settings page.
3 Select Disable Logins, then click OK to disable the post office.
4 To re-enable logins, deselect Disable Logins so that it is blank.

12.8 Moving a Post Office

You cannot move a Post Office object in ConsoleOne because it is a container object. Only leaf
objects can be moved. If you need to change the context, graft the GroupWise post office to its
corresponding eDirectory object in the new container location. See
Association," on page 77
You can, however, move the post office directory, the post office database (wphost.db), and the
other databases that reside in the post office by copying the post office directory structure and all its
contents to the new location.
IMPORTANT: Follow these instructions if you want to move a post office on a NetWare or
Windows server to another directory on the same server or to a different NetWare or Windows
server. If you want to move a post office located on a NetWare or Windows server onto a Linux
server, see
7 Installation
To move a post office directory structure and all its contents:
196 GroupWise 7 Administration Guide
for more information on grafting objects.
"Manually Migrating a Post Office and Its POA to
Guide.
Section 5.16, "GW / eDirectory
Linux" in "Update" in the GroupWise