Making The Dsfw Server Work When The Ip Address Is Changed; Error Mapping Sid To Uid; After Dsfw Installation, The Services Are Not Working; Error Messages In Log Files - Novell OPEN ENTERPRISE SERVER 2.0 SP2 - DOMAIN SERVICE FOR WINDOWS Manual

To prevent this issue from occurring, make sure that at least one domain controller in a domain is up.
For more details on this issue, see
search.do?cmd=displayKC&docType=kc&externalId=7003552&sliceId=1&docTypeID=DT_TID_
1_1&dialogID=77853582&stateId=0%200%2077851408)
19.1.17 Making the DSfW Server work When The IP address is
Changed
After the IP address is changed, execute the following instructions:
1 Execute the procedure listed in
SP2: Planning and Implementation
2 Complete the server reconfiguration by executing the instructions in
SP2: Planning and Implementation
After executing these steps, if the IP address change is not effective, delete the
file and restart
named/{DOMAIN}.db

19.1.18 Error Mapping SID to UID

This error will be recorded in the
available at
/var/log/samba/
If you see a rec_free_read bad magic entry in the log files, it indicates that the
corrupted. Delete the
tdb

19.1.19 After DSfW Installation, the Services are Not Working

DSfW consists of several services that need to be restarted in sequence. Execute the following
command to restart all DSfW services after installation.
xadcntrl reload
NOTE: You do not need to execute this command every time you install DSfW.

19.2 Error Messages in Log Files

Section 19.2.1, "ndsd Log File Error," on page 211

19.2.1 ndsd Log File Error

NlGetLocatorConfiguration "Could not get forest name from directory
If this message appears continuously in the
indicates that there is an error in name-mapping.
To resolve this error, reload the LDAP server by using the following commands:
TID 7003552. (http://www.novell.com/support/php/
"Changing the Server's Address
Guide.
Guide.
The IP address changes will be effective.
named.
/var/log/samba/log.winbindd
folder.
files in
/var/lib/samba/
/var/opt/novell/eDirectory/log/ndsd.log
Configuration" in the
"DSfW
or any of the samba log files
tdb
folder and then proceed.
OES 2
"in the OES 2
/etc/opt/novell/
files are
file, it
Troubleshooting 211