Table of Contents
Advertisement
2.6.3 Viewing the Current Status of a Business Continuity
Cluster
You can view the current status of your business continuity cluster by using either iManager or the
server console of a cluster in the business continuity cluster.
Using iManager
1 Start your Internet browser and enter the URL for iManager.
2 Enter your username and password.
3 In the left column, click Clusters, then click the BCC Manager link.
4 Specify a cluster name or browse and select one.
Using this page, you can see if all cluster peer connections are up or if one or more peer connections
are down. You can also see the status of the BCC resources in the business continuity cluster.
Using the Server Console
At the server console of a server in the business continuity cluster, enter the following commands to
get different kinds of status information:
cluster view
cluster status
cluster connections
2.6.4 Generating a Cluster Report
You can generate a report for each cluster in the business continuity cluster to list information on a
specific cluster, such as current cluster configuration, cluster nodes, and cluster resources. You can
print or save the report using your browser.
1 Start your Internet browser and enter the URL for iManager.
2 Enter your username and password.
3 In the left column, click Clusters, then click the Cluster Manager link.
4 Specify a cluster name or browse and select one.
5 Click the Run Report button.
46
Novell Business Continuity Clustering 1.1 for NetWare Administration Guide
The URL is http://server_ip_address/nps/iManager.html. Replace server_ip_address with the
IP address or DNS name of the server that has iManager and the IDM preconfigured templates
for iManager installed.
The URL is http://server_ip_address/nps/iManager.html. Replace server_ip_address with the
IP address or DNS name of the server that has iManager and the IDM preconfigured templates
for iManager installed.
Advertisement
Chapters
Table of Contents
