Novell BUSINESS CONTINUITY CLUSTERING FOR NETWARE 1.1 - ADMINISTRATION Manual page 90

4 Under Short Polling Interval, specify the number of seconds the monitor will wait each time it
5 Specify which platforms (Linux or NetWare
6 Click Apply to save your settings.
NOTE: See the
index.html?page=/documentation/cluster/ncss_enu/data/bktitle.html)
creating custom failover policies.
90 Novell Business Continuity Clustering 1.1 for NetWare Administration Guide
For the nodepnt and nodecnt monitors, the Maximum Health Indication value is for information
only, and should not be changed.
contacts the cluster or clusters to get health information.
The Long Polling Interval is not used with the default nodepnt and nodecnt monitors. This
value may be used for some custom monitors.
and whether you want the monitor enabled for the selected clusters.
The Optional Parameter field specifies a monitor-specific string value that is passed to the
monitor as a startup parameter.
The nodepnt and nodecnt monitors do not support optional parameters.
BCC NDK documentation (http://developer.novell.com/documentation/cluster/
®
) you want to be monitored by the health monitor
for more information on