Novell BUSINESS CONTINUITY CLUSTERING FOR NETWARE 1.1 - ADMINISTRATION Manual page 42

2 (Conditional) If you are enabling an existing cluster resource or cluster pool resource for
3 Ensure that the Enable Business Continuity Features check box is selected.
4 Continue with
Adding Resource Script Search and Replace Values
If you did not previously add search and replace data specific to the entire cluster, you must now add
it for this resource.
IMPORTANT: Adding resource script search and replace values for the entire cluster is
recommended rather than adding those values for individual cluster resources. You should contact
Novell Technical Support prior to adding search and replace values for individual cluster resources.
To enable a resource for business continuity, certain values (such as IP addresses, DNS names, and
tree names) specified in resource load and unload scripts need to be changed in corresponding
resources in the other clusters. You need to add the search and replace strings that are used to
transform cluster resource load and unload scripts from this cluster to another cluster.
The search and replace data you add is resource specific, and it is not synchronized via IDM
between the clusters in the business continuity cluster.
To add resource script search and replace values specific to this resource:
1 In the Resource Replacement Script section of the page, click New.
2 Add the desired search and replace values, then click OK.
3 If this is an existing cluster resource, continue with
42 Novell Business Continuity Clustering 1.1 for NetWare Administration Guide
business continuity, do the following:
2a Start your Internet browser and enter the URL for iManager.
The URL is http://server_ip_address/nps/iManager.html. Replace server_ip_address with
the IP address or DNS name of the server that has iManager and the IDM preconfigured
templates for iManager installed.
2b Enter your username and password.
2c In the left column, click Clusters, then click the Cluster Options link.
2d Specify a cluster name or browse and select one.
2e Select the desired cluster resource from the list of Cluster objects
2f Click the Details link, then click the Business Continuity tab.
Step 1 in the
If a resource has already been configured for business continuity, you can click Edit to change
existing search and replace values or click Delete to delete them.
The search and replace values you specify here apply to only to the resource you are enabling
for business continuity. If you want the search and replace values to apply to any or all cluster
resources, add them to the entire cluster instead of just to a specific resource.
See "Adding Resource Script Search and Replace Values" on page 36
resource script search and replace values and adding those values to the entire cluster.
Resource section below. If you are creating a new cluster resource, click Next, then continue
with Select the other clusters that this resource can be migrated to.
Clusters for the Resource
Adding Resource Script Search and Replace Values
section below.
for more information on
Step 1 in the Selecting Peer Clusters for the
in the Selecting Peer
section.