Page 1
Clamp-on 14” Shelf Pole Mount with Drawer Instruction Manual SKU: MOUNT-SF13D Scan the QR code with your mobile device or follow the link for helpful videos and specifications related to this product. https://vivo-us.com/products/mount-sf13d GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST help@vivo-us.com...
Page 2
WARNING! If you do not understand these directions, or if you have any doubts about the safety of the installation, please call a qualified technician. Check carefully to make sure there are no missing or defective parts. Improper installation may cause damage or serious injury. Do not use this product for any purpose that is not explicitly specified in this manual.
Page 3
ASSEMBLY STEPS STEP 1 Partially install the M6x60mm Screws (S-A) into the back of Shelf (A) using the 5mm Allen Wrench (T-A). NOTE: Do not fully tighten screws at this time.
Page 4
STEP 2 (Option A) For 25mm - 62mm (1” - 2.4”) Pole Slide the keyhole slots on Clamp Bracket (B) over the screw heads in the orientation shown below. Slide the Clamp Bracket (B) down until the screw heads are over the smaller portion of the keyhole slots.
Page 5
STEP 2 STEP 2 (Option B) For 12mm - 25mm (0.5” - 1”) Pole Slide the keyhole slots on Clamp Bracket (B) over the screw heads in the orientation shown below. Slide the Clamp Bracket (B) down until the screw heads are over the smaller portion of the keyhole slots.
Page 8
AVG. RESPONSE TIME (within office hrs) - 23% within < 15m - 38% within < 30m - 61% within < 1hr - 83% within < 2hr - 92% within < 3hr FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com...
Need help?
Do you have a question about the MOUNT-SF13D and is the answer not in the manual?
Questions and answers