Table of Contents
Advertisement
Quick Links
Black Dual Shelf Wall Mount Entertainment Center
Instruction Manual
SKU: MOUNT-SF002B
Scan the QR code with your mobile device or follow the link
for helpful videos and specifications related to this product.
https://vivo-us.com/products/mount-sf002b
GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST
help@vivo-us.com
www.vivo-us.com
Chat live with an agent!
309-278-5303
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Vivo MOUNT-SF002B
Summary of Contents for Vivo MOUNT-SF002B
- Page 1 Black Dual Shelf Wall Mount Entertainment Center Instruction Manual SKU: MOUNT-SF002B Scan the QR code with your mobile device or follow the link for helpful videos and specifications related to this product. https://vivo-us.com/products/mount-sf002b GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST help@vivo-us.com...
- Page 2 WARNING! If you do not understand these directions, or if you have any doubts about the safety of the installation, please call a qualified technician. Check carefully to make sure there are no missing or defective parts. Improper installation may cause damage or serious injury. Do not use this product for any purpose that is not explicitly specified in this manual.
- Page 3 TOOLS NEEDED DO NOT EXCEED WEIGHT CAPACITY. 22lbs Failure to do so may result in serious injury. (10kg) Phillips Drill Screwdriver WARNING! DO NOT ALLOW CHILDREN TO CLIMB OR PLAY ON SHELVES. FAILURE TO DO SO MAY RESULT IN SERIOUS INJURY. ASSEMBLY STEPS STEP 1 Insert and tighten cam lock screws (J) into front panel (B) at the locations...
- Page 4 STEP 3 Insert cam lock nuts (K) into left and right panels. Fit panels to the front panel with the cam lock nuts facing in, then tighten nuts with a Phillips screwdriver. NOTE: Panels (C) and (D) should be flush with panel (B) on side shown. Flush STEP 4 Insert and tighten cam lock screws (J) into rear two holes of bottom panel (E).
- Page 5 STEP 6 Mount support brackets (G) to upper locations on left and right panels using M6x12 bolts (M). Attach shelf to brackets using bolts and tighten with a Phillips screwdriver. Repeat for lower shelf.
- Page 6 STEP 7 OPTION A: Wood Stud Wall Place assembled shelf against wall and mark drilling locations with a pencil. Use of a level and stud finder is recommended. Drill 2.2” (55mm) deep holes using a 3/16” (4.5mm) drill bit, then mount shelf to wall using ST6.3x55 screws (R) with D6 washers (Q). For wall brackets not aligned with studs, please refer to OPTION B: Drywall to finish installation.
- Page 7 STEP 8 Clip plastic covers (H) onto the wall brackets. STEP 9 Lift the top panel off to organize cables. Replace panel when finished.
- Page 8 - 92% within < 3hr www.vivo-us.com : < 15 M AVG. RESOLUTION TIME (within office hrs) Chat live with an agent! : 5M 4S 309-278-5303 AVG. RESOLUTION TIME (within office hrs) FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com...
Need help?
Do you have a question about the MOUNT-SF002B and is the answer not in the manual?
Questions and answers