Appendix B; U-Boot Command Reference - Digi 9P 9360/9750 User Manual

Appendix B

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

U-Boot command reference

This chapter gives an overview of common used U-Boot commands. Detailed information
can be found at:
http://www.denx.de/wiki/view/DULG/Manual?stickboard=tqm8xxl
To get to the U-Boot prompt press any key immediately after you have powered the target
on or pressed reset. At the prompt type "help" or "?" to get an overview of the supported
commands.
7 1