Netum NT-1228BL Quick Start Manual
2d barcode scanner, compatible with 2.4g wireless & bluetooth & usb wired connection
Hide thumbs
Also See for NT-1228BL:
- Manual (70 pages) ,
- Setup manual (36 pages) ,
- Quick setup manual (14 pages)
Related Manuals for Netum NT-1228BL
Summary of Contents for Netum NT-1228BL
- Page 1 Barcode Scanner Quick Start Guide Packing list: Barcode Scanner-1 pc USB cable-1 pc Quick Start Guide -1 pc V18.7.27...
- Page 2 Bluetooth Barcode Scanner Overview Connection Mode Working via USB Cable Get Started: Connect scanner with your device via USB cable. If you use US keyboard, it's plug and play. If you use other type of keyboard , please refer to "keyboard language" to configure the keyboard language before use it.
- Page 3 2. Start a Bluetooth device search. iOS: Tap Settings | General | Bluetooth. Turn on Bluetooth. A Bluetooth device search will begin. 3. In the device list, tap on “Netum Bluetooth”. Tap Pair. 4. The scanner will connect to the Apple device.
- Page 4 French Keyboard TurkeyQ Keyboard Portugal Keyboard Czech Keyboard UK Keyboard...
- Page 5 America Keyboard German Keyboard TurkeyF Keyboard Spain Keyboard Italy Keyboard...
- Page 6 SPP Mode ( For Android or Windows only) Software installation is required. If you have an application that supports mobile scanners this is the mode recommended. SPP Mode Note if you shift from HID Mode to SPP Mode , Bluetooth will disconnect it, and you need to connect it again.
- Page 7 Store Mode If you are heading for a working area which lies outside the Bluetooth signal range, you may activate scanner’s store mode, following steps described below. Under this mode, all scanned data will be stored directly into the buffer memory of the device. Due to the fact that the data entries will be automatically wiped from the buffer memory during upload, a data loss is possible when malfunctions occur during upload, e.g.
- Page 8 • By scanning the following barcode, the gross quantity of the uploaded data entries will be summarised . Summarising of uploaded data entry quantity • By scanning the following barcode, the device leaves the store mode, normal mode will be reinitialised. Normal Mode Note: If scanner is on store mode and you want to shift it to HID mode you have to first read “Normal Mode”...
- Page 9 IOS Keyboard can be popup or hidden during scanning IOS Keybord Popup / Hide Beeper Enable/Disable scanner to beep to indicate successful scan BEEP ON BEEP OFF 1.Some barcodes can not be read,why ? The possible reason is that the setting for some barcode types are not commonly used is off...
- Page 10 2. Is there any barcodes for appling or remove suffix ? Yes, you can download the manual from our official webiste or turn to our customer service team for help. 3. The data can not be sent to my computer. Why? Please make sure you have turned off...
Need help?
Do you have a question about the NT-1228BL and is the answer not in the manual?
Questions and answers