Related Manuals for Leviton decora edge E5325
Summary of Contents for Leviton decora edge E5325
- Page 1 decora edge ™ Installation Instructions TAMPER-RESISTANT OUTLET 15A-125V DI-000-E5325-02A Cat. No. E5325...
- Page 2 SAFER, FASTER, and EASIER Leviton’s Decora Edge Tamper-Resistant Outlet makes it safer, faster, and easier to install a new outlet. Colored levers easily identify where to connect each wire. There are no exposed wires or metal parts after installation. Built-in strip gauge.
- Page 3 Features Terminates wire with a snap The colored levers snap shut to terminate the wires. Alignment Tab and Notch Aligns devices for multi-gang installations. Strap Levers Split Circuit Cover Covers the split circuit tab from live wire access. Break off for split circuits. Levers Break-off Fins Break off to install a...
- Page 4 Lever Wiring Feature The color-coded levers easily identify where to connect the wallbox wires to the outlet. Neutral Levers Line/ Load Levers Ground Lever NOTE: Wire colors in your wallbox may be different from the lever colors. See “Preparing Wires,” on page 5 to make sure you insert the wires properly.
- Page 5 Recommended Tools Slotted/Phillips Screwdriver Wire Stripper Needle Nose Pliers Voltage Tester...
- Page 6 Preparing Wires WARNING: TO AVOID FIRE, SHOCK, OR DEATH, TURN OFF POWER at circuit breaker or fuse and test that power is OFF before wiring! Make sure that the ends of the wires from the wallbox are straight (cut if necessary).
- Page 7 Wiring Your Device Remove the existing outlet. Verify that you have a Line (Black) wire, Neutral (White) wire, and a Ground (Bare Copper or Green) wire. NOTE: Work on only one connection at a time. Fully open lever. Insert the proper wire per lever color into the wire hole.
- Page 8 Common Feed Wiring Connect the wires as shown. From From Branch Circuit Branch Circuit LINE NEUTRAL GROUND If your back box looks different, consult an electrician...
- Page 9 Split Circuit Wiring Open split circuit cover. Break off split circuit tab and then close cover.
- Page 10 Split Circuit Wiring (continued) Connect the wires as shown. From From Branch Circuit Branch Circuit GROUND NEUTRAL LINE NEUTRAL LINE If your back box looks different, consult an electrician...
- Page 11 WARNING: Turn the power OFF at the breaker or fuse before you complete the installation. To complete the installation, proceed to the next page. If you are unsure about the installation process, contact Leviton Technical Support, or contact an electrician.
- Page 12 Wallplate Installation Preparation The outlet strap is designed for midway wallplates. If you want to use a standard size wallplate, carefully remove both break-off fins, as shown below. Remove...
- Page 13 Single-Gang Box Installation WARNING: Turn the power OFF at the circuit breaker before you tighten the screws. Tighten the mounting screws into wallbox. Install wallplate, and restore power.
- Page 14 Multi-Gang Box Installation WARNING: Turn the power OFF at the circuit breaker before you tighten the screws. To install the outlet next to other Decora Edge devices, use the alignment feature to easily place each device next to each other in the multi-gang box. Tighten the mounting screws into wallbox.
- Page 15 To clean, use a damp cloth with mild soap. PATENT STATEMENT Patents covering this product, if any, can be found on Leviton.com/patents. Limited 2 Year Warranty & Exclusions For Leviton’s limited product warranty, go to www.leviton.com. For a printed copy of the warranty, call 1-800-824-3005. FOR CANADA ONLY...
- Page 16 If you need help... ONLINE www.leviton.com/support CHAT www.leviton.com/contact CALL 1-800-824-3005 (USA) 1-800-405-5320 (Canada) Leviton Manufacturing Co., Inc. 201 North Service Road, Melville, NY 11747 © 2022 Leviton Manufacturing Co., Inc. All rights reserved. Specifications subject to change at any time without notice.
Need help?
Do you have a question about the decora edge E5325 and is the answer not in the manual?
Questions and answers