Page 1
Odette Fabric Bed - 5FT King Size Assembly Instructions Important before assembly: Read these instructions carefully before assembling or using the product. Please check the contents of the boxes before attempting to assemble this product. The instructions will have a checklist of parts and fittings.
Page 2
These tools are not necessary, but may help to assemble the product. Do NOT use any power tools as this may damage the frame. (Not metal) This product or some parts of this product will be heavy. Please use an assistant when lifting. Never drag or push the pieces across a hard or stone floor as this will cause damage to the joints.
Page 3
ASSEMBLY 150CM BED INSTRUCTIONS Approximate Assembly Time People Required to Assemble Tools Required Before you start... Please carefully unpack and lay out all of the component parts to ensure nothing is missing and to check each component for any obvious damage. Should you identify any concerns at this stage please contact the retailer from whom this product was purchased.
Page 4
Please check all hardware matches the list below. Should you notice any are missing please contact your retailer. JCBB M8 X 35MM JCBC M6 X 35MM JCBC M6 X 25MM SPRING WASHER 5/16" FLAT WASHER 5/16" FLAT WASHER 1/4" CSK M4 X 30MM ALLEN KEY M4 ALLEN KEY M5 We strongly advise that you do not use Power Tools, such...
Page 5
PARTS Please ensure you carefully check all the pieces, should you have any concerns please contact the retailer before assembly commences. Please have your order number, details of the issue, the product code, and the batch number from the cartons as this will help us to resolve your issue much faster.
Page 6
ASSEMBLY ADVICE Please take the time to carefully read through these instructions before you commence. Keep these instructions for future reference. We advise that the product is assembled in the room it is intended for. We advise that you keep the hardware in a bowl during assembly to avoid losing anything.
Page 10
Attach the slat by pushing the side rail together so that the slat is flush against the side rail, before inserting the screw.
Page 12
Please dispose of all packaging safely. General Care & Maintenance Wipe clean with a slightly damp cloth. Avoid the use of all household cleaners and abrasives. Periodically check all screw & fixings to ensure they are secure. When moving your product, carefully lift into place. Never drag or push the product across the floor as this will cause damage to the joints.
Need help?
Do you have a question about the Odette and is the answer not in the manual?
Questions and answers