Tools and materials Thank You For Choosing Karat We appreciate your commitment to Karat quality. Please take a few minutes to review this manual before you start installation. If you encounter any installation or performance problems, please don’t hesitate to contact us. Our phone numbers and website are listed on the back cover. Thanks again for choosing Karat.
Page 3
For K-23980X-ET (TOP SPUD) Roughing-in Dimension (Top Spud) Roughing-In remains the same when using the optional 3” outlet spud.
Page 4
1. Preparation Turn the water supply off. Install or relocate the supply tubing and waste pipe as necessary to con- form to the roughing-in dimensions. Install the shut-off valve. Install adequate support framing as needed.
Page 5
Anchor Wall Hanger Screw Washer 2. Install the Urinal Temporarily position the hanger against the wall according to the roughing-information. Use a pencil to mark the anchor hole location on finished wall. Remove the hanger. Drill 5/16” (8 mm.) mounting holes on marked location on the wall. Install anchor into the mounting holes.
Apply thread sealant tape to the pipe threads and install the female collar to the waste pipe. Place the gasket onto the female collar with the beveled surface facing away from the collar. CAUTION: Risk of personal injury or product damage. Handle with care.
Need help?
Do you have a question about the KARAT K-23980X-ET and is the answer not in the manual?
Questions and answers