Advertisement
Advertisement
Table of Contents
Related Manuals for Keysight Technologies N495 A Series
Summary of Contents for Keysight Technologies N495 A Series
- Page 1 Reference Guide Keysight N495xA through N498xA Connector Care...
- Page 2 Limited Rights as defined in prior agreement and written consent from APPLICABLE LAW, KEYSIGHT DISCLAIMS FAR 52.227-14 (June 1987) or DFAR Keysight Technologies, Inc. as governed by ALL WARRANTIES, EITHER EXPRESS OR 252.227-7015 (b)(2) (November 1995), as United States and international copyright IMPLIED WITH REGARD TO THIS MANUAL applicable in any technical data.
-
Page 3: Safety Summary
Keysight Technologies assumes no liability for the customer's failure to comply with these requirements. Product manuals are provided with your instrument on CD-ROM and/or in printed form. -
Page 4: Safety Symbols
Safety Symbols Table 1. Safety Symbol Symbol Description Indicates warning or caution. If you see this symbol on a product, you must refer to the manuals for specific Warning or Caution information to avoid personal injury or damage to the product. Frame or chassis ground terminal. -
Page 5: Compliance And Environmental Information
The South Korean Class A EMC declaration (KC) mark indicates that this product is Class A suitable for professional use and is for use in electromagnetic environments outside of the home. The KC mark includes the marking’s identifier code that has up to 26 digits and follows this format: KCC-VWX-YYY-ZZZZZZZZZZZZZ. - Page 6 Contents Product specific recommendations ............7 Discharging cables .................. 10 Keysight N4974A/N4975A...
- Page 7 Product specific recommendations Proper connector care and connection techniques are critical for accurate, repeatable measurements, and for extending the life of your devices. Prior to making connections, be sure to read all of the connector care information provided with your product. This document provides quick reference tips on proper connector care as well as some product-specific recommendations.
- Page 8 N4962A Front Panel: Front Panel: N4963A Use 2.92 mm (rigid) connector savers for front panel data Rigid 2.92 mm M-F: N8990-01910 ports if frequent mate/un-mate cycles are anticipated. This part is included with N4962A purchase only. Additional parts may be purchased online: www.keysight.com/find/parts Rear Panel: Rear Panel:...
- Page 9 Handling and Storage Do Not • • Keep connectors clean Touch mating-plane surfaces • • Extend sleeve or connector nut Set connectors contact-end down • Use plastic end caps during storage Visual Inspection Do Not • • Inspect all connectors carefully before every Use a damaged connector- ever connection •...
- Page 10 Discharging cables Loose cables are like a capacitor and can hold electrostatic charges. In addition, the free end of a cable touching surfaces that have voltage levels will damage the equipment. Therefore, before connecting any cable to a connector, short the center and outer conductors of the cable together to ground momentarily or use the cable discharger (p/n M8000-68750) shown below.
- Page 11 AC transients, insufficient grounding, or floating neutral lines, which cause damaging currents to flow into or out of the equipment. For more information on Keysight Technologies’ products, applications, or services, please contact your local Keysight office. The complete list is available at www.keysight.com/find/contactus.
- Page 12 This information is subject to change without notice. © Copyright Keysight Technologies 2012-2015 Edition 2.0, January 2015 www.keysight.com...
Need help?
Do you have a question about the N495 A Series and is the answer not in the manual?
Questions and answers