Download
Share
Print this page
Directed XPRESSSTART ONE 4x10 Installation Manual
  1. Manuals
  2. Brands
  3. Directed Manuals
  4. Automobile Accessories
  5. XPRESSSTART ONE 4x10
  6. Installation manual
Directed XPRESSSTART ONE 4x10 Installation Manual

Directed XPRESSSTART ONE 4x10 Installation Manual

Hide thumbs

Advertisement

Quick Links

Download this manual
4x10/5x10
HKHT1
Installation Guide
This product is intended for installation by a professional
installer only! Attempts to install this product by a per-
son other than a trained professional may result in severe
damage to a vehicle's electrical system and components.
© 2013 Directed, Vista, CA
KA4x10/5x10 2013-03

Advertisement

loading
Need help?

Need help?

Do you have a question about the XPRESSSTART ONE 4x10 and is the answer not in the manual?

Questions and answers

Related Manuals for Directed XPRESSSTART ONE 4x10

Summary of Contents for Directed XPRESSSTART ONE 4x10

  • Page 1 This product is intended for installation by a professional installer only! Attempts to install this product by a per- son other than a trained professional may result in severe damage to a vehicle’s electrical system and components. © 2013 Directed, Vista, CA KA4x10/5x10 2013-03...
  • Page 2 Contents Warning! Safety first ........................3 Introduction ............................ 4 xpressSTART ONE 4x10/5x10 compatibilities ................4 What you get ........................... 4 Vehicle application guide ......................5 Main module connections ........................ 6 Wiring connections ......................... 7 Main power harness (H1), 12-pin thick gauge connector .............. 7 Auxiliary output harness (H2), 16-pin black connector ..............
  • Page 3 This testing should be performed by an authorized Directed dealer in accordance with the Safety Check outlined in this product installation guide. If the vehicle starts in gear, cease remote start operation immediately and consult with the user to fix the problem immediately.
  • Page 4 Unlock your vehicle doors simply by walking up to the vehicle, or walking away to lock. It can be installed in combination with any Directed or Autostart remote start by connecting to the D2D port – with no additional wires to connect.
  • Page 5 DL: OE Door Lock & Alarm Controls FOB: Sync CAN Interface w/ FOB Remote PK: Transponder & Immobilizer Override RS: xpressSTART & Engine Controls SS: Integrated Security & Monitoring ST: Function/Feature Status xpressSTART ONE 4x10/5x10 HKHT1 © 2013 Directed. All rights reserved.
  • Page 6 Transponder RF Loop 2 pins, White NOT included Main Ignition Harness (H4) 8 thick-gauge wires The XKLoader2 is required to program the unit. It must be disconnected at the time of installation. xpressSTART ONE 4x10/5x10 HKHT1 © 2013 Directed. All rights reserved.
  • Page 7 (-) AUX 1 OUTPUT* H2/12 WHITE/RED (+) AUX 1 OUTPUT* H2/13 LT. GREEN/BLACK (-) FACTORY ALARM DISARM OUTPUT H2/14 GREEN/RED (+) AUX 4 OUTPUT* H2/15 VIOLET/RED No connection H2/16 VIOLET/YELLOW No connection xpressSTART ONE 4x10/5x10 HKHT1 © 2013 Directed. All rights reserved.
  • Page 8 (+) IGNITION OUTPUT (also input to Yellow in ribbon cable) H4/4 (+) 12 VOLT INPUT H4/5 ORANGE (+) ACCESSORY OUTPUT H4/6 (+) 12 VOLT INPUT H4/7 GREEN STARTER INPUT (from key switch)** H4/8 VIOLET (+) STARTER OUTPUT (to starter) xpressSTART ONE 4x10/5x10 HKHT1 © 2013 Directed. All rights reserved.
  • Page 9 ***** The installation of an aftermarket hood pin is only required on vehicles that are not equipped with a factory hood pin. With the exception of the OBDII diagnostic connector, all adapters are displayed from the wire side (unless specified otherwise). xpressSTART ONE 4x10/5x10 HKHT1 © 2013 Directed. All rights reserved.
  • Page 10 ****** Connect this analog input wire only if the Tach feature is not supported in data. See the Vehicle application guide for more information on supported features. With the exception of the OBDII diagnostic connector, all adapters are displayed from the wire side (unless specified otherwise). xpressSTART ONE 4x10/5x10 HKHT1 © 2013 Directed. All rights reserved.
  • Page 11 ***** The installation of an aftermarket hood pin is only required on vehicles that are not equipped with a factory hood pin. With the exception of the OBDII diagnostic connector, all adapters are displayed from the wire side (unless specified otherwise). xpressSTART ONE 4x10/5x10 HKHT1 © 2013 Directed. All rights reserved.
  • Page 12 Rev B SmartStart – The gray wire must be connected to a ground source. • Do NOT connect the 2-pin harness (on SmartStart). Power and ground will be provided by the 4x10/5x10 D2D connector. xpressSTART ONE 4x10/5x10 HKHT1 © 2013 Directed. All rights reserved.
  • Page 13 If the vehicle does NOT have a transponder, the LED flashes red 3 times. Press the programming button 5 times to skip the transponder programming. & Flashes (If Required) Red x3 Press x5 xpressSTART ONE 4x10/5x10 HKHT1 © 2013 Directed. All rights reserved.
  • Page 14 & Flashes (If Required) Red x3 Press x5 3. The LED turns ON solid orange for 3 seconds, then shuts off. & Solid Orange x3 secs xpressSTART ONE 4x10/5x10 HKHT1 © 2013 Directed. All rights reserved.
  • Page 15 "Learning the Tach (not needed with Virtual Tach)" on page 27. Initialize tachometer The module reset will be done automatically upon programming. * Your aftermarket remote may differ from the model shown in the illustrations. xpressSTART ONE 4x10/5x10 HKHT1 © 2013 Directed. All rights reserved.
  • Page 16 Solid x3 Secs Solid green for Module has been successfullly pro- Normal operation. 3 seconds grammed. Solid x3 Secs Remote Start ON Flashes green Remote start ON. Normal operation. Flashes xpressSTART ONE 4x10/5x10 HKHT1 © 2013 Directed. All rights reserved.
  • Page 17 If testing while the system is armed: 1. Wait at least 15 seconds after arming before impacting the vehicle. 2. Cycle the ignition On/Off regularly to reset the Nuisance Prevention Circuitry® (NPC) feature. xpressSTART ONE 4x10/5x10 HKHT1 © 2013 Directed. All rights reserved.
  • Page 18 Supplies one pulse after the module ends the remote start process when it turns off. This function is very useful for cars equipped with a Push-to-Start system. Pulse After Startup Supplies a 1-second output immediately following the end of the starter output during remote start. xpressSTART ONE 4x10/5x10 HKHT1 © 2013 Directed. All rights reserved.
  • Page 19 2 or Start 2 H3/8 (-) Brown/Black Horn H3/18 (-) Blue/White Active when running See H1 table on H1/Relay 1 page 7 See H1 table on H1/Relay 2 page 7 xpressSTART ONE 4x10/5x10 HKHT1 © 2013 Directed. All rights reserved.
  • Page 20 On: panic output can be activated at any time. Panic Mode Ignition Off only: output can be activated only when the ignition is off. Off: output is disabled. xpressSTART ONE 4x10/5x10 HKHT1 © 2013 Directed. All rights reserved.
  • Page 21 Options: 1 to 16 minutes. The default value is 3 minutes. Runtime (minutes SmartStart/Timer Mode Options: 1/2/3/4 to 24 (Starts) in increments of 2. The default value is 1 start. Start Count xpressSTART ONE 4x10/5x10 HKHT1 © 2013 Directed. All rights reserved.
  • Page 22 Smart Start Low battery OFF, 9V to 12.5V in 0.5V increments: sets the low battery level threshold required for SmartStart to turn the engine on. The default value is 11.0V. (Volts) xpressSTART ONE 4x10/5x10 HKHT1 © 2013 Directed. All rights reserved.
  • Page 23 Options: 1 to 90 seconds. The default value is 30 seconds. Aux 1 Timed Output Aux 2 Icon Refer to Aux 1 Icon. Aux 2 Output Type Refer to Aux 1 Output Type. xpressSTART ONE 4x10/5x10 HKHT1 © 2013 Directed. All rights reserved.
  • Page 24 Off: OEM Alarm Disarm wire will NOT pulse when the Aux/Trunk output is activated. OEM Alarm Disarm w/ Aux-Trunk On: OEM Alarm Disarm wire will pulse as programmed when the Aux/Trunk output is activated. xpressSTART ONE 4x10/5x10 HKHT1 © 2013 Directed. All rights reserved.
  • Page 25 Locks/unlocks the user’s ability to enter the HHU/Reset menu and manually change any functions using the Control Center. The default value is Unlocked. Disable OEM Alarm Disarm With Unlock Enable xpressSTART ONE 4x10/5x10 HKHT1 © 2013 Directed. All rights reserved.
  • Page 26 Important! After successfully learning Virtual Tach, a small minority of vehicle starters may over crank or under crank during remote start. Use the VirtualTach Fine tune feature to adjust the starter output time in 50mS increments to compensate for such an occurrence. xpressSTART ONE 4x10/5x10 HKHT1 © 2013 Directed. All rights reserved.
  • Page 27 Turbo mode error: Turbo mode is programmed off, engine is not on or shutdown input is active. Manual mode error: MTS mode not enabled. ** Alarm was triggered during remote start sequence. xpressSTART ONE 4x10/5x10 HKHT1 © 2013 Directed. All rights reserved.
  • Page 28 1 minute or until the ignition is turned off. Refer to table of zones. Note: The Warn Away triggers are not stored to memory and is not reported. xpressSTART ONE 4x10/5x10 HKHT1 © 2013 Directed. All rights reserved.
  • Page 29 Reducing the sensitivity can solve this problem. This unit has easily-reversed lock/unlock outputs. Recheck wire connections to see if you have Door locks operate backwards. reversed these. xpressSTART ONE 4x10/5x10 HKHT1 © 2013 Directed. All rights reserved.
  • Page 30 MTS mode. • Make sure the remote start safety override switch is plugged in and turned on, and that the neutral safety wire is grounded. xpressSTART ONE 4x10/5x10 HKHT1 © 2013 Directed. All rights reserved.
  • Page 31 • If the contacts of the vehicle’s parking brake switch is not adequate when the brake is set, clean the con- tacts or replace the switch. xpressSTART ONE 4x10/5x10 HKHT1 © 2013 Directed. All rights reserved.
  • Page 32 Sportage 2011- G - Black 20-pin Blue Right of Junction Box Right of Junction Box 2013 FT CAN connectors All adapters are displayed from the wire side (unless specified otherwise). xpressSTART ONE 4x10/5x10 HKHT1 © 2013 Directed. All rights reserved.
  • Page 33 Black 6-pin Pink White Blue White Sportage 2011-2013 Black 6-pin Green Blue White Sportage (4-cylinder) 2008-2010 Black 6-pin Blue Orange Green White Sportage (6-cylinder) 2008-2010 Black 6-pin Blue Orange Green White xpressSTART ONE 4x10/5x10 HKHT1 © 2013 Directed. All rights reserved.
  • Page 34 Blue 39-pin (C*) Sportage 2011-2013 Blue or White/Orange Passenger Kick Yellow 24-pin (R*) Sportage (4-cyl- 2008-2010 Blue/Black Passenger Kick Brown 23-pin (S*) inder) Sportage (V6) 2008-2010 Brown/Orange Passenger Kick Blue 16-pin (T*) xpressSTART ONE 4x10/5x10 HKHT1 © 2013 Directed. All rights reserved.
  • Page 35 EMS COM (data) connectors All adapters are displayed from the wire side (unless specified otherwise). xpressSTART ONE 4x10/5x10 HKHT1 © 2013 Directed. All rights reserved.
  • Page 36 Shutdown switch is used to disable the remote start feature. Status LED A light used to indicate the status of your system. It is located on your system’s Control Center. xpressSTART ONE 4x10/5x10 HKHT1 © 2013 Directed. All rights reserved.
  • Page 37 A flash utility that can be used to verify and save firmware images onto the control module. XKLoader2 Device used to link your control module to the USB port of a computer. xpressSTART ONE 4x10/5x10 HKHT1 © 2013 Directed. All rights reserved.
  • Page 38 Directed dealer; the unit will be professionally reinstalled in the vehicle in which it was originally installed by an authorized Directed dealer; and the unit is returned to Directed, shipping prepaid with a legible copy of the bill of sale or other dated proof of purchase bearing the following information: consumer’s name, telephone number and address;...

This manual is also suitable for:

Xpressstart one 5x10Hkht1Xpressstart one tl6