Contents Important notice Parking Assist System (PTS) helps to provide User Manual Installation Manual assistance when reversing and parking. Driving Important Notice --------------------------------------- Brief Installation Diagram ---------------------------- skills such as slowing down, use of mirrors are Disclaimer ----------------------------------------------- Includes -------------------------------------------------- always essential.
About the Product 2 or 4-Sensor Automatic Recognition Optional Extension Cable The PTS411 is a 4-sensor parking system that When fitting this system on the front of a vehicle, The parking system can be used as a 2-sensor can be used as a front or rear ultrasonic distance system when fitted on either the front or rear of we highly recommend purchasing a set of monitoring device (Dual-purpose).
PTS411 Volume and Frequency Adjustment PTS411 Sensor Installation Height The system can vary the sensor installation height, achieved by changing a jumper on the ECU before Volume adjustment Frequency adjustment The PTS411 sound frequency can be adjusted to instalation. High / Low by turning the frequency switch. Low volume Medium volume Tips: If the PTS411 is installed together with the front sensor system, it is...
PTS411-M6 Volume and Frequency Adjustment PTS411-M6 Sensor Installation Height The system can vary the sensor installation height, achieved by changing a jumper on the ECU before instalation. 54cm~65cm 54cm~65cm 45cm~54cm 45cm~54cm Turn your vehicle ignition to "Accessories" on and press the SET button once. You will hear a beep as the front system enters volume adjustment mode.
Dual Intelligent Function for Spare Wheel (Rear System) Self-Testing Function For Front System: Make these settings to set up as a rear parking system (jumper position in “R”). Once your vehicle ACCESSORIES is turned on, the system will test all front sensors automotically. When this function is ON, the detected distance will increase 20cm (from 30cm to 50cm) between If all sensors are working properly, the buzzer will not sound alert.
Learning Function Learning function for cars with nudge bars or other protrusions (Front System) For Rear System: When reverse gear is selected, the system will test all rear sensors automatically. Please find a location without obstacles to activate this function. If all sensors are working properly, the buzzer will "BEEP"...
How Does the System Work (Front System) Learning Function for Cars with Tow-Bar or Spare Wheel (Rear System) Driving forward, press footbrake Please find a location without obstacles to activate this function. 1. With the ignition “ON”, change the gear from “N” to “R” 10 times (Each gear change must be within 1 second).
Page 9
How Does The System Work (Rear System) Reversing Reversing For PTS411: For PTS411: BEEP - BEEP BEEP No "BEEP" BEEP - BEEP BEEP No "BEEP" Distance: 1.5m Distance: 0.6m Distance: <0.3m > Distance: <0.3m Distance: 0.4m Distance: 0.7m > For PTS411-M6: For PTS411-M6: No "BEEP"...
Different Scenarios for System with Buzzer (Rear System) Attention Sensor Maintenance False detection may occur in the following situations: PTS411 PTS411-M6 Backlight Distance BEEP--------- Do not wash the sensor with a pressure washer or scrub them forcibly. BEEP- BEEP- BEEP- BEEP- BEEP- BEEP- <0.3m BEEP-...
Page 12
Installation Manual Includes While it is possible to install this product yourself with some intermediate experience, we recommend that you read the installation instructions first and seek professional installation if you are unsure. We highly recommend that you have this product professionally installed to ensure that it will perform and function as it is has been manufactured and designed to.
Page 13
Sensor Installation The sensor head angle can be changed to compensate for angled bumpers. See the instructions overleaf. H > 45cm/ H > 45cm H < 65cm H < 65cm < 45cm < 45cm < 45cm H < 45cm 1.0m 35cm<L1<45cm 45cm<L2<55cm 45cm<H<65cm...
Page 14
Change of sensor cover. (Built-in) Note: Check that the size of the hole saw included with this product matches the diameter of the sensors before drilling any holes. Tips: Make sure the degree marking is on the top of the sensor plug after assembly.
Page 15
Hint: If a gap exists between your bumper and 10 sensor cover after installation, adjust the angle of the hole shown as below. G a p Bumper A n g l e...
Page 17
PTS411-M6 Installation Installation mode 1 Installation mode 2 B C D Tear off sticker and fix the display on the Tear off sticker and fix the display on the top of dashboard firmly for the driver to easily see. the rear mirror. Installation mode 3 PTS411 PTS411-M6...
Page 18
Note: The Pink ACC+ wire is used to supply a clean live power to the kit when the feed to the reverse light is low voltage or pulsed (not a clean liver power). Insulation (not used) Insulation (not used) PTS411 PTS411 PTS411-M6 PTS411-M6...
Page 19
Functional Test Troubleshooting 1. After installation, the buzzer doesn't work. 6. If the problem persists: Functional testing is • Make sure the wires are connected properly • For end users: Please contact your nearest performed by holding a • Make sure the vehicle has ACCESSORIES dealer or customer service center wooden board (0.3 x1.0m) powered ON...
Page 20
All costs involved in claiming this warranty, DEVICES AND SENSORS (UNLESS A LONGER WARRANTY PERIOD IS REQUIRED BY LAW). including the cost of the retailer sending the product to Directed Electronics, will be borne by you. THE SPECIFICS OF THIS PARKMATE LIMITED WARRANTY ARE AT HTTPS://WWW.PARKMATE.COM.AU/WARRANTY...
Page 21
PRODUCTS OR PARKMATE SERVICES WILL BE COMPATIBLE WITH ANY OTHER SPECIFIC MIRROR MONITOR DEVICES AND SENSORS, PARKMATE AND ITS SUPPLIERS DISCLAIM ALL HARDWARE OR SERVICE. FURTHER, PARKMATE DOES NOT WARRANT THAT THE WARRANTIES OF ANY KIND, WHETHER EXPRESS, IMPLIED, OR STATUTORY, REGARDING PARKMATE SERVICES OR THE PARKMATE SERVERS THAT PROVIDE YOU WITH DATA AND THE PARKMATE EQUIPMENT AND ANY ASSOCIATED APP/SERVICE.
Page 22
Notes FORESEEABLE IN SUCH CASE. SHOULD THE CLAIM FOR DAMAGES BE BASED ON WILFUL OR GROSSLY NEGLIGENT BREACH OF CONTRACTUAL DUTY OR OBLIGATION ON THE PART OF PARKMATE, THE PRECLUSION AND LIMITATION OF LIABILITY MENTIONED IN THE PRECEDING SENTENCES WILL NOT APPLY. THE PRECEDING PRECLUSION AND LIMITATION OF LIABILITY WILL ALSO NOT APPLY TO CLAIMS FOR DAMAGES ARISING OUT OF LOSS OF LIFE, BODILY INJURY OR HEALTH IMPACTS FOR WHICH PARKMATE MAY BE LIABLE, OR FOR NON-CONTRACTUAL LIABILITY.