Advertisement
Quick Links
Advertisement
Related Manuals for CAMPAGNOLO ULTRA TORQUE CRANKSET
Summary of Contents for CAMPAGNOLO ULTRA TORQUE CRANKSET
- Page 1 ULTRA TORQUE ™ CRANKSET...
- Page 2 • Fit the left-hand crank into the bottom bracket MIN.11.7 mm • Make sure that the crankarms are correctly al • Using Campagnolo tool UT-BB110 insert the fixi it passes through the hole at the inner end of the of the left crank.
- Page 3 (Fig. 19) from the bb shell even if they were tightened by ha NRING ASSEMBLY AND DISASSEMBLY RNING! essary to replace the chainrings, contact a Campagnolo Service C ® checked using special equipment. Final assembly must be carefully personal injury or death.
- Page 4 Do not store bike parts in vehicles parked in the sun, and rces. Do not store carbon fiber products in direct sunlight. ure. Pressurized water, even from the nozzle of a small garden hose, can pass nents, damaging them beyond repair. Wash your bicycle and Campagnolo ® nd neutral soap.
- Page 5 Note Loctite 222 can be used freely on the thread of the fixing bolt ® BB040 Campagnolo UT-BB050 ® UT-BB041 Campagnolo UT-BB051 ®...
- Page 6 ITA-Gewinde 36mmx24tpi - BSA-Gewinde 1.370i von Hand fest, bis sie sich nicht mehr dreht (siehe • Stellen Sie sicher, dass die Breite des Lagergeh ichen, saugfähigen Lappen (Abb. 7). Verwenden Campagnolo UT-BB130 ® Werten entspricht. • Reinigen und entfetten Sie die Gewinde des T rschale.
- Page 7 5 mm allen wrench: aluminium cranksets Torx T30: carbon cranksets...
- Page 8 Campagnolo s.r.l. or hidden, latent or obvious defects in the product, and agrees to hold Campagnolo s.r.l. harmless to the fullest extent per- mitted by law against any resulting damages.
-
Page 9: Installation
Campagnolo s.r.l. is providing in these instructions three assembly methods. The first method is the “preferred” one that should be followed for best results. The second method is the “standard” one and is almost as good, but less effective in preventing noises and reducing corrosion, the third method is the “temporary”... - Page 10 • Make sure that the crankarms are correctly aligned (Fig. 13). • Using Campagnolo tool UT-BB110 insert the fixing bolt (B - Fig. 14) in the semi-spindle of the right crank until it passes through the hole at the inner end of the semi-spindle and it engages the thread of the semi-spindle of the left crank.
- Page 11 (Fig. 19) from the bb shell even if they were tightened by hand. 5. CHAINRING ASSEMBLY AND DISASSEMBLY WARNING! If it is necessary to replace the chainrings, contact a Campagnolo Service Center since the flatness must be ®...
- Page 12 NOTE Never spray your bicycle with water under pressure. Pressurized water, even from the nozzle of a small garden hose, can pass seals and enter into your Campagnolo components, damaging them beyond repair. Wash your bicycle and Campagnolo ® ®...
- Page 13 E-mail: campagnolo@campagnolo.fr Service Information: Phone: +33-477-554449 Campagnolo s.r.l. reserves the right to modify the content of this manual without prior notice. The updated version will always be available www.campagnolo.com. On our website you will also find information on the other Campagnolo ®...
Need help?
Do you have a question about the ULTRA TORQUE CRANKSET and is the answer not in the manual?
Questions and answers