Page 1
TECHN ICAL MANUAL - 6 WHEE L S WHE EL CENTER IN G C A M PA G N O L O. CO M...
Page 2
WARNING! Always wear protective gloves and glasses while working on the bicycle. THIS TECHNICAL MANUAL IS INTENDED FOR USE BY PROFESSIONAL MECHANICS. Anyone who is not a qualified professional for bicycle assembly must not attempt to install and operate on the components independently due to the risk of carrying out incorrect operations which could cause the components to malfunction, resulting in accidents, physical injury or even death.
Page 3
Zonda™ Bullet™ Ultra™ PRODUCTS ON WHICH THE PROCEDURE SHOULD BE APPLIED Refer to the “Table of Technical Manuals for Wheels”, available at www.campagnolo.com / section “Technical Documentation – Technical Manuals”. Scirocco™ Khamsin™ Vento™ Insert the wheel on the Truing stand.
Page 4
ROAD CYCLOCROSS PISTA Refer to the “Table of Technical Manuals for Wheels”, available at www.campagnolo.com / section “Technical Documentation – Technical Manuals”. MAINTENANCE Settle the spokes. For each spoke firmly pull the rim with After the wheel has settled, check again both the axial Check the tension of all the spokes of the wheel.
Need help?
Do you have a question about the Shamal and is the answer not in the manual?
Questions and answers