Page 1
Saturn III pop-up ® gear drive head • Installation instructions Tuyère à turbine escamotable Saturn III ® • Instructions d’installation Aspersor emergente tipo rotor Saturno III ® • Instrucciones de instalación Saturn III irrigatore a ® scomparsa con azionamento ad ingranaggi •...
Page 2
Pre-Set the Rotation Saturn III sprinklers are preset to ® rotate approximately 180°. Sprinklers may be adjusted with water on or off. It is recommended that the initial adjustment be made before installation. 1. Using the palm of your hand, rotate...
Page 3
Sprinkler Installation Flush Lines Turn the water on to thoroughly flush the lines of dirt and debris before installing any sprinkler heads. Install the Sprinkler Head 1. Complete steps 1 & 2 under “Pre-Set the Rotation.” 2. Select and install a riser to obtain the proper height (Fig.
Page 4
6. Release the riser. Warning: To avoid pinching hands or fingers, release the riser with caution. Cleaning the Filter 1. Your Saturn III Gear Drive Sprinkler ® filter may need to be cleaned periodically. To access the filter, unscrew the cap and remove the cap/spring assembly from the body.
Page 5
FIGURES • FIGURAS Pre-set the rotation Adjustment Programmer la rotation Réglage Establezca previamente la rotación Ajuste Regolare la rotazione Regolazione Einstellen der Rotation Einstellung Pré-regulagem da rotação Chave de fenda Pattern adjustment slot Fente de réglage du secteur d’arrosage Ranura de ajuste del arco de riego Guida di regolazione del modello Sektor-Einstellschlitz Ranhura de ajuste do padrão de névoa...
Need help?
Do you have a question about the Saturn III and is the answer not in the manual?
Questions and answers