Schlage ND Series Install
Hide thumbs
Also See for ND Series:
- Service manual (96 pages) ,
- Installation instructions manual (12 pages) ,
- Standard installation instructions (4 pages)
Advertisement
Quick Links
*P517-432*
P517-432
IMPORTANT: DO NOT insert key in outside cylinder
(if applicable) before or during these steps!
*P517-432*
Step 1
Install Lock
EXCEPT
INSIDE LEVER
ND60, ND66,
ND75, ND93,
Conventional
ND95
Step 6
Cylinder
Interchangeable
Core Cylinder
Install Lock
EXCEPT
OUTSIDE LEVER
ND70, ND73,
ND94, ND97
Conventional
Cylinder
Install Lock
EXCEPT
BOTH LEVERS
ND72
Interchangeable
key 180°
Core Cylinder
Conventional
Cylinder
Interchangeable
Core Cylinder
90°
ND-Series Timing Guide
FAILURE TO PROPERLY TIME THE LOCK WILL
RESULT IN IMPROPER FUNCTION, AND CAN CAUSE
DAMAGE TO THE LOCK.
P517-432
ND66
ND60
ND75
ND93
ND95
Step 1
Check Operation
See chart below for correct
key rotation.
ND66
ND72*
ND75
ND95
ND60
ND93
Install Lock
ND70
ND94
EXCEPT
INSIDE LEVER
ND73
ND97
ND60, ND66,
ND75, ND93,
ND95
ND72* : Follow steps 2-5 to time
inside lever, then continue to step 6.
For example, ND66 will lock and
unlock with a 360° turn of the key.
Install Lock
EXCEPT
OUTSIDE LEVER
ND70, ND73,
ND94, ND97
Install Lock
EXCEPT
BOTH LEVERS
ND72
Step 2
From INSIDE, rotate
key cam CCW
until it stops.
Tools Needed
From INSIDE, rotate
key cam CCW
until it stops.
Step 5
From OUTSIDE,
rotate key cam CCW
until it stops.
INSIDE rotates 360°
to lock and unlock.
OUTSIDE rotates 360°
to lock and unlock.
INSIDE rotates 360°
to lock and unlock.
OUTSIDE rotates
to retract latch.
OUTSIDE rotates 360°
to lock and unlock.
OUTSIDE rotates 360°
to lock and unlock.
When OUTSIDE is locked
by push button, OUTSIDE
key should rotate 45° to
unlock.
Step 4
Install Cylinder and Lever
With key rotated 90° clockwise, press
lever onto lever post.
For IC Cylinders:
Align cylinder tailpiece blade
and keyway.
FSIC
Insert assembly into lever.
360°
ND
Now, rotate
CW to:
Now, rotate
CW to:
Now, rotate
CW to:
90°
ND66
SFIC
ND60
ND75
ND93
ND95
Advertisement
Related Manuals for Schlage ND Series
Summary of Contents for Schlage ND Series
- Page 1 *P517-432* ND-Series Timing Guide P517-432 IMPORTANT: DO NOT insert key in outside cylinder (if applicable) before or during these steps! *P517-432* FAILURE TO PROPERLY TIME THE LOCK WILL RESULT IN IMPROPER FUNCTION, AND CAN CAUSE Step 1 Step 2 DAMAGE TO THE LOCK. From INSIDE, rotate P517-432 key cam CCW...
- Page 2 Step 2 From INSIDE, rotate key cam CCW until it stops. From INSIDE, rotate key cam CCW until it stops. From OUTSIDE, rotate key cam CCW until it stops.
- Page 3 Step 3 Now, rotate Conventional CW to: Cylinder Interchangeable Core Cylinder Now, rotate Conventional CW to: Cylinder Interchangeable Core Cylinder Conventional Now, rotate Cylinder CW to: Interchangeable Core Cylinder...
- Page 4 Step 4 Install Cylinder and Lever With key rotated 90° clockwise, press lever onto lever post. 90° For IC Cylinders: Align cylinder tailpiece blade and keyway. FSIC SFIC Insert assembly into lever.
-
Page 5: Check Operation
Step 5 Check Operation See chart below for correct key rotation. INSIDE rotates 360° ND66 ND72* to lock and unlock. ND75 OUTSIDE rotates 360° ND95 to lock and unlock. INSIDE rotates 360° ND60 ND93 to lock and unlock. OUTSIDE rotates to retract latch. -
Page 6: Troubleshooting
and reinstall. Step 6 Remove Keyed Lever Troubleshooting If your lock does not allow you to remove key, remove keyed lever, rotate key 180° and reinstall. 90° Remove Keyed Lever To remove a keyed lever, rotate key 90°. 90° To remove a keyed lever, rotate key 90°.
Need help?
Do you have a question about the ND Series and is the answer not in the manual?
Questions and answers