Related Manuals for Leviton D215R
Summary of Contents for Leviton D215R
- Page 1 Getting Started Guide TAMPER-RESISTANT OUTLET Cat. No. D215R DI-000-D215R-02A...
- Page 2 Easy Wi-Fi lighting control for the whole home See the complete line of My Leviton app compatible dimmers, switches, plug-ins, and controllers at: leviton.com/decorasmart...
- Page 3 Google Assistant, or Apple Siri – or use your smartphone or tablet to control the outlet with the My Leviton app, even when away from home. Built-in scheduling allows you to turn devices ON or OFF at specific times, or at sunrise or sunset. A convenient push-button provides manual control.
- Page 4 For indoor use only. WARNING: Do not use with aluminum wire. Additional self-service support options can be found in the My Leviton app, or at: leviton.com/decorasmart RATINGS General Use 15A, 120VAC, 60Hz LED / CFL / Electronic Ballast 5A Incandescent / Halogen...
- Page 5 At a glance Tamper Resistant Built-in shutters help prevent the insertion of unintended foreign objects. Controlled Outlet Press the control button or use an app command to turn the outlet ON/OFF. Integrated Control Button Provides manual control as well as setup and configuration. Vanishing feedback light Illuminates when the controlled outlet is ON.
- Page 6 Provides ON/OFF control of a variety of plug loads, including plug-in lamps, holiday lighting, electronics, and small appliances. • Control the top outlet using the My Leviton app, schedule, voice, or the Apple Home app. • Works with Alexa, Hey Google, and Apple Siri for voice control.
-
Page 7: Before You Install
A 2.4GHz Wi-Fi network with high-speed internet. An iOS (version 12.0 or later) or Android (version 8.0 or later) mobile device. NOTE: Make sure that Wi-Fi and Bluetooth are enabled on your mobile device. A My Leviton cloud account (set up through the My Leviton app). -
Page 8: Installation
Verify that you have a Line (Black) wire, Neutral (White) wire, and a Ground (Bare Copper) wire. Work only on one connection at a time, and connect your new D215R Outlet as shown. Line (Black) – Black Screw Neutral (White) – White Screw Ground (Bare Copper) –... - Page 9 Test and install Restore power. Status LED should flash GREEN, indicating that your outlet is ready to be added to a network.
- Page 10 Test and install (continued) Turn off power at the circuit breaker before completing installation of the outlet. Gently push wires into wall box. Screw outlet to box. Install wallplate base and snap on Decora wallplate. ® Restore power. Once power is restored, the status LED will blink GREEN indicating your device is in Setup mode.
- Page 11 Get the app To download the app, visit and select the link, or scan my.leviton.com the below QR code for your device.
-
Page 12: Device Setup
My Leviton service, Apple HomeKit, or both. • For voice control with Amazon Alexa or Google Assistant, you will need to set up the device with My Leviton. • For voice control with Siri, you will need to connect your device to Apple HomeKit. -
Page 13: Quick Tip
Open the My Leviton app. Tap icon to turn ON/OFF. Quick tip • The My Leviton app includes many features such as: scheduling, remote control, Vacation mode, auto shut- off, activities, room scenes, and advanced options for status LED indication. - Page 14 Connect to My Leviton partners (optional) works with Hey Google Visit for a complete list of my.leviton.com compatible smart home products. Tap menu icon in lower right corner. Tap Integrations, locate the desired service, select it, and follow the instructions.
-
Page 15: Diagnostic Led
Add your device to Apple HomeKit (optional) Skip step 1 if your device is already enrolled to My Leviton and NOTE: on your Wi-Fi network. Make sure the device is in Setup mode (status LED should be blinking GREEN). If the status LED is not blinking GREEN, see page 15 for instructions on how to put the device into Setup mode. -
Page 16: Status Led
Alternating Identify feature is triggered from the Amber Blink My Leviton app. Please see My.Leviton.com support for additional diagnostic assistance. Setup mode Hold control button for 7 seconds until status light turns AMBER. Then release. The status light will flash GREEN. The device is now in Setup mode. -
Page 17: Factory Default Reset
Confirm that the Neutral wire is connected. Not connected to Wi-Fi: • If your device is set up in the My Leviton app, select your device and then select “Device Settings“. On the “Device Settings” screen, select “Reconfigure Wireless”. •... -
Page 18: Safety First
Model D215R – Tamper-Resistant Outlet is manufactured by Leviton Manufacturing Co., Inc. 201 N. Service Road, Melville, NY 11747. www.leviton.com This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. - Page 19 ONLINE decorasmartsupport.leviton.com CHAT www.leviton.com/support EMAIL dssupport@leviton.com CALL 1-800-824-3005 (USA) 1-800-405-5320 (Canada) Leviton Manufacturing Co., Inc. 201 North Service Road, Melville, NY 11747 © 2021 Leviton Manufacturing Co., Inc. All rights reserved. Specifications subject to change at any time without notice.
Need help?
Do you have a question about the D215R and is the answer not in the manual?
Questions and answers