Ethernet Parameters - Red Hat ENTERPRISE LINUX 3 Reference Manual

286
Hardware
NCR53c810/820/720,
NCR53c700/710/700-66
Adaptec AACRAID
Adaptec 28xx, R9xx, 39xx
AHA-284x, AHA-29xx,
AHA-394x, AHA-398x,
AHA-274x, AHA-274xT,
AHA-2842, AHA-2910B,
AHA-2920C, AHA-2930/U/U2,
AHA-2940/W/U/UW/AU/,
U2W/U2/U2B/, U2BOEM,
AHA-2944D/WD/UD/UWD,
AHA-2950U2/W/B,
AHA-3940/U/W/UW/,
AUW/U2W/U2B,
AHA-3950U2D,
AHA-3985/U/W/UW, AIC-777x,
AIC-785x, AIC-786x, AIC-787x,
AIC-788x , AIC-789x, AIC-3860
ICP RAID Controller
IBM ServeRAID
AMI MegaRAID 418, 428, 438,
466, 762
Qlogic 1280
Table A-1. SCSI Parameters
A.3. Ethernet Parameters
Important
Most modern Ethernet-based network interface cards (NICs), do not require module parameters to
alter settings. Instead, they can be configured using
to work should module parameters be adjusted.
For information about using these tools, consult the man pages for
Hardware
3Com EtherLink PCI
III/XL Vortex (3c590,
3c592, 3c595, 3c597)
Boomerang (3c900, 3c905,
3c595)
Appendix A. General Parameters and Modules
Module
53c7,8xx.o
aacraid.o
aic7xxx.o
gdth.o
ips.o
megaraid.o
qla1280.o
Module
3c59x.o
Parameters
or
ethtool mii-tool
ethtool
Parameters
full_duplex=
0 is off
1 is on
. Only after these tools fail
and .
mii-tool