Red Hat ENTERPRISE LINUX 3 Reference Manual page 55

sysconfig
Chapter 4. The
4.1.16.
/etc/sysconfig/irda
The
/etc/sysconfig/irda
startup.
The following values may be used:
, where
•
IRDA= value
—
yes irattach
•
the infrared port, such as another notebook computer trying to make a network connection. For
infrared devices to work on the system, this line must be set to
—
no irattach
•
•
DEVICE= value
connections.
• DONGLE= value
munication. This setting exists for people who use serial dongles rather than real infrared ports. A
dongle is a device that is attached to a traditional serial port to communicate via infrared. This line
is commented out by default because notebooks with real infrared ports are far more common than
computers with add-on dongles.
• DISCOVERY= value
— Starts
yes irattach
•
vices. This must be turned on for the machine to actively looking for an infrared connection
(meaning the peer that does not initiate the connection).
— Does not start
no
•
4.1.17.
/etc/sysconfig/keyboard
The
/etc/sysconfig/keyboard
may be used:
• KEYBOARDTYPE=sun|pc
on , and
/dev/kbd
• KEYTABLE= file
For example:
KEYTABLE="us"
/lib/kbd/keymaps/i386
file .kmap.gz
setting is used.
KEYTABLE
4.1.18.
/etc/sysconfig/kudzu
The
/etc/sysconfig/kuzdu
time. A safe probe is one that disables serial port probing.
, where
• SAFE= value
— does a safe probe.
yes kuzdu
•
— does a normal probe.
no kuzdu
•
Directory
file controls how infrared devices on the system are configured at
is one of the following boolean values:
value
is run, which periodically checks to see if anything is trying to connect to
is not run, preventing infrared device communication.
, where
value
, where specifies the type of dongle being used for infrared com-
value
, where
value
in discovery mode, meaning it actively checks for other infrared de-
in discovery mode.
irattach
file controls the behavior of the keyboard. The following values
, which is used on SPARCs only.
means a PS/2 keyboard connected to a PS/2 port.
pc
, where is the name of a keytable file.
file
. The files that can be used as keytables start in
and branch into different keyboard layouts from there, all labeled
. The first file found beneath
file triggers a safe probe of the system hardware by
is one of the following:
value
is the device (usually a serial port) that handles infrared
is one of the following boolean values:
sun
/lib/kbd/keymaps/i386
.
yes
means a Sun keyboard is attached
that matches the
kudzu
37
at boot