Red Hat ENTERPRISE LINUX 3 Reference Manual page 108

90
7.3.1.2.
ServerFlags
The optional
ServerFlags
tings in this section may be overridden by options placed in the
Section 7.3.1.3
ServerLayout
Each entry within the
followed by an option enclosed in double quotation marks (
The following is a sample
Section "ServerFlags"
Option "DontZap" "true"
EndSection
The following is a list of some of the most useful options:
• "DontZap" " boolean "
prevents the use of the [Ctrl]-[Alt]-[Backspace] key combination to immediately terminate the
XFree86 server.
• "DontZoom" " boolean "
vents cycling through configured video resolutions using the [Ctrl]-[Alt]-[Keypad-Plus] and [Ctrl]-
[Alt]-[Keypad-Minus] key combinations.
7.3.1.3.
ServerLayout
The
ServerLayout
server. At a minimum, this section must specify one output device and at least two input devices (a
keyboard and a mouse).
The following example illustrates a typical
Section "ServerLayout"
Identifier
Screen
InputDevice
InputDevice
EndSection
The following entries are commonly used in the
— Specifies a unique name for this
•
Identifier
— Specifies the name of a
• Screen
one options may be present.
Screen
The following is an example of a typical
Screen 0
The first number in this example
head on the video card uses the configuration specified in the
.
"Screen0"
If the video card has more than one head, another
number and a different
The numbers to the right of
corner of the screen (
— Specifies the name of an
•
InputDevice
server.
section contains miscellaneous global XFree86 server settings. Any set-
for details).
section is on its own line and begins with the term
ServerFlags
ServerFlags
— When the value of
— When the value of
section binds together the input and output devices controlled by the XFree86
"Default Layout"
0 "Screen0" 0 0
"Mouse0" "CorePointer"
"Keyboard0" "CoreKeyboard"
Screen
"Screen0" 0 0
Screen
section identifier.
Screen
"Screen0"
by default).
0 0
).
"
section:
boolean
boolean
section:
ServerLayout
ServerLayout
ServerLayout
section to be used with the XFree86 server. More than
entry:
Screen
entry ( ) indicates that the first monitor connector or
0
entry would be necessary with a different
Screen
give the X and Y absolute coordinates for the upper-left
InputDevice
Chapter 7. The X Window System
ServerLayout
is set to true, this setting
is set to true, this setting pre-
section:
section.
section with the identifier
Screen
section to be used with the XFree86
section (refer to
Option