Specifying One Authenticating Directory Server And Multiple Subtrees; Using Non-Default Parameter Values - Red Hat DIRECTORY SERVER 7.1 - ADMINISTRATOR Administrator's Manual

nsslapd-pluginarg0: ldap://configdir.example.com/o=NetscapeRoot
nsslapd-pluginarg1: ldap://config2dir.example.com/o=NetscapeRoot
nsslapd-plugin-depends-on-type: database
nsslapd-pluginId: passthruauth
nsslapd-pluginVersion: 7.1
nsslapd-pluginVendor: Red Hat, Inc.
nsslapd-pluginDescription: pass through authentication plugin
Specifying One Authenticating Directory Server and
Multiple Subtrees
The following example configures the PTA directory server to pass through bind
requests for more than one subtree (using parameter defaults):
dn: cn=Pass Through Authentication,cn=plugins,cn=config
objectClass: top
objectClass: nsSlapdPlugin
objectClass: extensibleObject
cn: Pass Through Authentication
nsslapd-pluginPath:
/opt/redhat-ds/servers/lib/passthru-plugin.so
nsslapd-pluginInitfunc: passthruauth_init
nsslapd-pluginType: preoperation
nsslapd-pluginEnabled: on
nsslapd-pluginarg0: ldap://configdir.example.com/o=NetscapeRoot
nsslapd-pluginarg1:
ldap://configdir.example.com/dc=example,dc=com
nsslapd-plugin-depends-on-type: database
nsslapd-pluginId: passthruauth
nsslapd-pluginVersion: 7.1
nsslapd-pluginVendor: Red Hat, Inc.
nsslapd-pluginDescription: pass through authentication plugin

Using Non-Default Parameter Values

This example uses a non-default value (
connections parameter
value. However, because one parameter is specified, all parameters must be
defined explicitly in the syntax.
) only for the maximum number of
10
. Each of the other parameters is set to its default
maxconns
Chapter 16
PTA Plug-in Syntax Examples
Using the Pass-through Authentication Plug-in 525