Pta Plug-In Syntax Examples - Red Hat DIRECTORY SERVER 7.1 - ADMINISTRATOR Administrator's Manual

Create an LDIF file that contains the following LDIF update statements:
1.
Make sure there is a space between the
parameters.
For example, you could set the value of the
In this example, each of the optional parameters is set to its default value.
Use the
2.
Restart the server.
3.
For information on restarting the server, refer to "Starting and Stopping the
Directory Server," on page 37.

PTA Plug-in Syntax Examples

This section contains the following examples of PTA Plug-in syntax in the
dse.ldif
• Specifying One Authenticating Directory Server and One Subtree
• Specifying Multiple Authenticating Directory Servers
• Specifying One Authenticating Directory Server and Multiple Subtrees
• Using Non-Default Parameter Values
• Specifying Different Optional Parameters and Subtrees for Different
Authenticating Directory Servers
dn: cn=Pass Through Authentication,cn=plugins,cn=config
changetype: add
add: nsslapd-pluginarg0
nsslapd-pluginarg0: ldap://authDS/subtree
[maxconns,maxops,timeout,ldver,connlifetime]
"ldap://dirserver.example.com/o=NetscapeRoot 3,5,300,3,300"
command to import the LDIF file into the directory.
ldapmodify
file:
parameter, and the optional
subtree
nsslapd-pluginarg0
Chapter 16 Using the Pass-through Authentication Plug-in
PTA Plug-in Syntax Examples
attribute to:
523