Red Hat DIRECTORY SERVER 7.1 - ADMINISTRATOR Administrator's Manual page 334

Configuring Multi-Master Replication
d.
e.
f.
g.
h.
Set up replication agreements on all the supplier servers:
4.
H
H
H
334 Red Hat Directory Server Administrator's Guide • May 2005
In the Common Settings section, specify a Replica ID.
The replica ID must be an integer between
must be unique for a given suffix. Make sure you specify an ID that is
different from the IDs used for read-write replicas on this server and on
other servers.
In the Common Settings section, specify a purge delay in the "Purge
delay" field.
This option indicates how often the state information stored in the
replicated entries is purged.
In the Update Settings section, specify the supplier bind DN or entry DN
that the supplier will use to bind to the replica.
This supplier bind DN should correspond to the entry created in Step 2.
The supplier bind DN corresponds to a privileged user because it is not
subject to access control.
Specify the supplier server to which you want to refer updates (the other
suppliers in the multi-master set).
Only specify the URL for the supplier server. If you want clients to bind
using SSL, you must specify a URL beginning with
Click Save to save the replication settings for the database.
On server M1, set up the following replication agreements: one with
supplier server M2, where server M2 is configured as a consumer for the
replica; one with supplier server M4, where server M4 is configured as a
consumer for the replica; and one for each consumer servers, Server C1
through Server C8.
On server M2, set up the following replication agreements: one with
supplier server M1, where server M1 is declared as a consumer for the
replica; one with supplier server M3, where server M3 is declared as a
consumer for the replica; and one for each consumer servers, Server C1
through Server C8.
On server M3, set up the following replication agreements: one with
supplier server M2, where server M2 is declared as a consumer for the
replica; one with supplier server M4, where server M4 is declared as a
consumer for the replica; and one for each consumer, Server C1 through
Server C8.
and , both inclusive, and
1 254
.
ldaps://