Red Hat CLUSTER FOR ENTERPRISE LINUX 5.0 Configuration Manual page 85

2. At the bottom of the right frame (labeled Properties), click the Create a Service button.
Clicking Create a Service causes the Add a Service dialog box to be displayed.
3. At the Add a Service dialog box, type the name of the service in the Name text box and click
OK. Clicking OK causes the Service Management dialog box to be displayed (refer to
Figure 5.9, "Adding a Cluster
Tip
Use a descriptive name that clearly distinguishes the service from other services
in the cluster.
Figure 5.9. Adding a Cluster Service
4. If you want to restrict the members on which this cluster service is able to run, choose a
failover domain from the Failover Domain drop-down box. (Refer to
Service").
Adding a Cluster Service to the Cluster
Section 6, "Configuring
75