Red Hat CLUSTER FOR ENTERPRISE LINUX 5.0 Configuration Manual page 106

Appendix B. Fence Device Parameters
Field
Login
Password
Password Script
(optional)
Authentication Type
Use Lanplus
Table B.10. IPMI (Intelligent Platform Management Interface) LAN
Field Description
Name A name to assign the Manual fencing agent. Refer to
more information.
Table B.11. Manual Fencing
Warning
Manual fencing is not supported for production environments.
Field Description
Name A name for the McData device connected to the cluster.
IP Address The IP address assigned to the device.
Login The login name used to access the device.
Password The password used to authenticate the connection to the device.
Password The script that supplies a password for access to the fence device. Using this
Script supersedes the Password parameter.
(optional)
Table B.12. McData SAN Switch
Field Description
Name A name for the WTI RPS-10 power switch connected to the cluster.
Device The device the switch is connected to on the controlling host (for example,
/dev/ttys2
96
Description
The login name of a user capable of issuing power on/off
commands to the given IPMI port.
The password used to authenticate the connection to the IPMI
port.
The script that supplies a password for access to the fence device.
Using this supersedes the Password parameter.
, , , or
none password md2
or . If blank, then value is
True 1
).
md5
.
False
fence_manual
(8) for