Table of Contents
Advertisement
Chapter 3.
Configuring Red Hat Cluster With
Conga
This chapter describes how to configure Red Hat Cluster software using Conga, and consists of
the following sections:
•
Section 1, "Configuration Tasks"
•
Section 2, "Starting luci and ricci"
•
Section 3, "Creating A Cluster"
•
Section 4, "Global Cluster Properties"
•
Section 5, "Configuring Fence Devices"
•
Section 6, "Configuring Cluster Members"
•
Section 7, "Configuring a Failover Domain"
•
Section 8, "Adding Cluster Resources"
•
Section 9, "Adding a Cluster Service to the Cluster"
•
Section 10, "Configuring Cluster Storage"
1. Configuration Tasks
Configuring Red Hat Cluster software with Conga consists of the following steps:
1. Configuring and running the Conga configuration user interface — the luci server. Refer to
Section 2, "Starting luci and
2. Creating a cluster. Refer to
3. Configuring global cluster properties. Refer to
4. Configuring fence devices. Refer to
5. Configuring cluster members. Refer to
6. Creating failover domains. Refer to
7. Creating resources. Refer to
8. Creating cluster services. Refer to
9. Configuring storage. Refer to
ricci".
Section 3, "Creating A
Section 4, "Global Cluster
Section 5, "Configuring Fence
Section 6, "Configuring Cluster
Section 7, "Configuring a Failover
Section 8, "Adding Cluster
Section 9, "Adding a Cluster Service to the
Section 10, "Configuring Cluster
Cluster".
Devices".
Members".
Domain".
Resources".
Storage".
Properties".
Cluster".
27
Advertisement
Table of Contents
