Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Gram HCC 600-60
Summary of Contents for Gram HCC 600-60
- Page 1 HCC 600-60 INSTRUCTION MANUAL INDUCTION HOB IO-HOB-1610 / 8514448 (07.2023 / v5)
-
Page 2: Basic Information
Congratulations on the new GRAM hob Your hob combines exceptional ease of use with excellent effectiveness. Once you have read the instructions, operating your hob will not be a problem. Before being packed and leaving the factory, the safety and functions of this hob were ca- refully tested. -
Page 3: Table Of Contents
TABLE OF CONTENTS Basic information ....................2 Safety instructions ....................4 Saving energy .......................7 Description of the appliance ................8 Installation ......................9 Operation ......................14 Cleaning and routine maintenance ..............18 Emergency procedure..................19 Technical data .....................21... -
Page 4: Safety Instructions
SAFETY INSTRUCTIONS Warning: The appliance and its accessible parts become hot during use. Care should be taken to avoid touching heating elements. Children less than 8 years of age shall be kept away unless continuously supervised. This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or... - Page 5 SAFETY INSTRUCTIONS Warning: If the surface is cracked, switch off the ap- pliance to avoid the possibillity of electric shock. The appliance is not intended to be operated by me- ans of an external timer or separate remote-control system. You should not use steam cleaning devices to clean the appliance.
- Page 6 Should cracks or splits appear on the surface of your ceramic plate immediately discon- nect it from the mains. In order to do so, switch off the fuse or pull out the mains plug from the socket. Call the Customer GRAM Service ●...
-
Page 7: Saving Energy
ENERGISPARETIPS UDPAKNING Apparatet er blevet sikret Hvis du sparer på ener gien, mod transportskader under er det godt for miljøet, og det befordringen ved hjælp af vil reducere din elregning. en emballage. Efter foretaget udpakning bedes du sørge for, at emballagens elemen- ter bortskaffes på... -
Page 8: Description Of The Appliance
DESCRIPTION OF THE APPLIANCE Description of hob Rear left cooking zone Ø 145 mm Double ring rear right cooking zone Ø 180 mm Double ring front left cooking zone Ø 210 mm Front right cooking zone Ø 145 mm Control Panel 1. -
Page 9: Installation
INSTALLATION Making the worktop recess • Worktop thickness should be 28 - 40 mm, while its width at least 600 mm. The worktop must be flat and level. Edge of the worktop near the wall must be sealed to prevent ingress of water or other liquids. - Page 10 INSTALLATION Note. When installing the hob in the kit- chen worktop, install a partition panel, as shown on the picture. If the hob is to be installed above a built-in oven, instal- lation of the partition panel is not requ- ired.
- Page 11 INSTALLATION Assembly of the gasket Depending on the model, the seal is already installed at the factory (fig.1) If the seal has not been fitted at the factory, proceed as follows: Before installing the hob in the cut-out worktop, the gasket is to be attached to the back of the hob (pic.
-
Page 12: Connecting The Plate To The Electrical System
INSTALLATION Connecting the plate to the electrical system Note! The plate can be connected to the mains only by a qualified certified installer. Wilful adaptations or modifications to the electric system are prohibited. Guidelines for the installer The plate is factory-set for three-phase alternating current power supply (400 V 3N~50 Hz). It may be adapted for one-phase current power supply (230 V) by adequate bridging on the connection strip, in accordance with the attached wiring diagram. - Page 13 INSTALLATION WIRING DIAGRAM Important! Heating elements operate at 230V. Important! For each con- nection the protective con- Recommended ductor must be connected connection lead to the terminal marked 1 230 V single phase connection with H05VV-F3G4 3X 4 mm a neutral lead, terminals 1-2-3 are bridged, neutral lead to terminal 4, and the protective conductor to 2 400/230V two phase connection...
-
Page 14: Operation
OPERATION Before first use ● carefully clean the ceramic plate treating it as a glass surface, ● when used for the first time the plate can give off a bit of a smell so switch on the ventilation system or open the window, ●... - Page 15 OPERATION Control Panel When you connect the appliance to power, Child Lock indicator (5) will be on. Touch and hold the Child Lock sensor (5) until the indicator is off. Now you can use the appliance. No objects should be placed on the sensors (this could cause an error). Touch sensors should be always kept clean.
-
Page 16: Automatic Warm-Up Function
OPERATION The Child Lock function The child lock function, which is activated by touching the child lock sensor (5) protects the appliance from being unintentionally operated or switched on by children or pets. Setting the child lock function when all cooking zones are switched off (“0” is displayed on all cooking zone displays) protects the cooking surface from inadvertent operation. -
Page 17: Turn Off The Appliance
OPERATION Residual heat indicator Heat energy that remains accumulated in the cooking zone after cooking is called the residual heat. The appliance displays two different levels of residual heat. When a cooking zone tem- perature is above 65°C and the cooking zone or the appliance is switched off, the relevant cooking zone display will show the letter "H". -
Page 18: Cleaning And Routine Maintenance
CLEANING AND ROUTINE MAINTENANCE Daily cleaning and proper maintenance have crucial impact on the durability of your ceramic plate. Clean the ceramic plate observing the same rules as for glass. Never use abrasive or aggressive clean- ing agents, scrubbing powders or scratching sponges. -
Page 19: Emergency Procedure
● have the appliance repaired ● Based on the instructions given in the table below, some minor issues can be corrected by the user. Please check the consecutive points in the table before you refer the repair to customer GRAM service. PROBLEM CAUSE ACTION 1.The appliance is not wor-... - Page 20 GRAM Service Centre. 9. If the fault still remains Disconnect the ceramic plate from the mains (fuse) and call the nearest Customer GRAM Service Centre. Important! You are the person responsible for proper condition and operation of the appliance in your household. If you call...
-
Page 21: Technical Data
TECHNICAL DATA Rated voltage: 230/400V 3N~50 Hz Rated power: 6,5kW Model: HCC 600-60 - hotplate: 2 x Ø 145 mm 1200 kW - hotplate: 1 x Ø 180 mm 1800 kW - hotplate: 1 x Ø 210 mm 2300 kW... - Page 24 Gram A/S Gram A/S Gram A/S Tel.: 22 07 26 30 Tel.: 040 38 08 40 Tel.: 020 7756 350 www.gram.no www.gram.se www.gram.fi Gram A/S Gejlhavegård 2B DK-6000 Kolding +45 73 20 10 00 www.gram.dk...
Need help?
Do you have a question about the HCC 600-60 and is the answer not in the manual?
Questions and answers