Related Manuals for HOOKE ROAD MMR.20038
Summary of Contents for HOOKE ROAD MMR.20038
- Page 1 Throttle Body Spacer MMR.20038 (1) Contents: (2) Tools required: a. 8mm Socket Wrench; b. Slotted Screwdriver;...
-
Page 2: Installation Time
(3) Installation time: About 40 minutes, 1-2 persons needed. Installation time is different according to your mechanical skill level. (PLEASE VERIFY ALL PARTS ARE PRESENT AND READ INSTRUCTIONS CAREFULLY BEFORE STARTING INSTALLATION!) (4) Installation instruction: Step 1: Disconnect the battery. Disconnect the Air Intake Temperature (AIT) sensor from the stock air inlet tube. - Page 3 assembly and place the lower right bolt into the intake manifold and then rotate and align the assembly placing the other bolts into the intake manifold. Step3: Tighten bolts in a crisscross pattern to 8 ft-lbs. Reconnect electrical connector to the bottom of the throttle body; install the air inlet tube followed by the air intake temperature sensor.
- Page 4 Notes: Don’t over tighten the bolts. If the bolts are over tightened the throttle body will crack! Step 4: The installation is complete. We hope you enjoy a wonderful off-road life with this quality Hooke Road product!
- Page 5 1.The product parts in this instruction may differ slightly from the actual product contents but generally does not affect the installation of the product. 2.Please feel free to contact your distributor if you have any kind of question about your purchase. Hooke Road to find your parts...
Need help?
Do you have a question about the MMR.20038 and is the answer not in the manual?
Questions and answers