Download Print this page

Kuryakyn 8398 Installation

Inner primary cover for softails

Advertisement

Quick Links

INNER PRIMARY COVER for SOFTAILS
PARTS INCLUDED
1
Inner Primary Front Cover
1
Inner Primary Rear Cover
1
Hardware Kit containing:
1
1/4"-20 x 4-1/4" Socket Head Cap Screw
1
1/4"-20 x 1-1/2" Socket Head Cap Screw
3
Aluminum Locating Washers
1
#10-24 High Crown Acorn Nut
4
Hot Spots
1
Installation Instructions
Please read and understand entire instructions before starting installation.
THANK YOU FOR CHOOSING K
IN ORDER TO PROTECT YOU AND OTHERS FROM POSSIBLE INJURY AND/OR
PROPERTY DAMAGE OR LOSS, PLEASE PAY CLOSE ATTENTION TO ALL
INSTRUCTIONS, WARNINGS, CAUTIONS AND ATTENTION NOTES REGARDING
THE USE AND CARE OF THIS PRODUCT.
WARNING!
THIS INDICATION ALERTS YOU TO THE FACT THAT IGNORING
THE CONTENTS DESCRIBED HEREIN CAN RESULT IN
POTENTIAL DEATH OR SERIOUS INJURY.
ATTENTION!
This indication alerts you to the fact that ignoring the contents
described herein may negatively affect product performance and
functionality.
CAUTION!
This indication alerts you to the fact that ignoring the contents
described herein can result in potential injury or material
damage.
TOOLS SUGGESTED
Set of Hex Wrenches, Set of Combination Wrenches, Torque Wrench (in/lbs) with Hex Sockets
STRICTLY OBSERVE THE FOLLOWING GUIDELINES IN ORDER TO USE THE
PRODUCT PROPERLY AND AVOID POTENTIALLY DANGEROUS ACCIDENTS.
STEP 1
Read and understand all steps in the instructions before starting the
installation. Park the motorcycle on a hard, level surface and turn off the
ignition. Let cool.
WARNING!
YOU WILL BE WORKING AROUND THE ENGINE AND EXHAUST
SYSTEM DURING INSTALLATION. ENSURE THAT THE ENGINE
AND EXHAUST SYSTEM HAVE FULLY COOLED TO PREVENT
INJURY.
NOTE:
The rear cover will not fit on FLSTC Springer Classic.
-cont.-
8398-23HD-0212
ϋ
RYAKYN!
INSTALLATION
8398
CUSTOMER SERVICE
INSTALLATION QUESTIONS
techsupport@kuryakyn.com
LIMITED WARRANTY
Küryakyn warrants that any Küryakyn products
sold hereunder, shall be free of defects in
materials and workmanship for a period of one
(1) year from the date of purchase by the
consumer excepting the following provisions:
Küryakyn shall have no obligation in the event
the customer is unable to provide a receipt
showing the date the customer purchased the
●The product must be properly installed,
maintained and operated under
●Küryakyn makes no warranty, expressed or
implied, with respect to any gold plated
●Küryakyn shall not be liable for any
consequential and incidental damages, including
labor and paint, resulting from failure of a
Küryakyn product, failure to deliver, delay in
delivery, delivery in nonconforming condition, or
for any breech of contract or duty between
Küryakyn and a customer.
●Küryakyn products are often intended for use in
specific applications. Küryakyn makes no
warranty if a Küryakyn product is used in
applications other than intended.
●Küryakyn electrical products are warranted for
one (1) year from the date of purchase by the
consumer. L.E.D.'S contained in components of
Küryakyn products will be warranted for defects
in materials and workmanship for 3 years from
the date of purchase where as all other
components shall be warranted for one(1) year.
This includes, but is not limited to; control
modules, wiring, chrome & other components.
●Küryakyn makes no warranty of any kind in
regard to other manufacturer¹s products
distributed by Küryakyn. Küryakyn will pass on
all warranties made by the manufacturer and
where possible, will expedite the claim on behalf
of the customer, but ultimately, responsibility for
disposition of the warranty claim lies
ABOUT OUR CATALOG
For purchasing Küryakyn® products, you
can receive a complete catalog free of charge.
Send the Proof-of-Purchase below with
your address to: Küryakyn, P.O. Box 339,
Please indicate either Accessories Catalog for
Harley-Davidson® or GL & Metric Cruisers.
Be sure to ask your local dealer about other
Küryakyn® products, the motorcycle parts and
accessories designed for riders by riders.
©2005 Küryakyn USA® All Rights reserved.
877.370.3604 (toll free)
or call 715.247.2983
product(s).
normal conditions.
products.
with the manufacturer.
Somerset, WI 54025.

Advertisement

loading
Need help?

Need help?

Do you have a question about the 8398 and is the answer not in the manual?

Questions and answers

Summary of Contents for Kuryakyn 8398

  • Page 1 INSTALLATION INNER PRIMARY COVER for SOFTAILS 8398 CUSTOMER SERVICE 877.370.3604 (toll free) PARTS INCLUDED INSTALLATION QUESTIONS Inner Primary Front Cover techsupport@kuryakyn.com Inner Primary Rear Cover or call 715.247.2983 Hardware Kit containing: LIMITED WARRANTY 1/4”-20 x 4-1/4” Socket Head Cap Screw Küryakyn warrants that any Küryakyn products...
  • Page 2 STEP 2 PIC 1 Remove the stock fasteners shown in PIC.1; the one marked “A” will be re-used. STEP 3 Install the stock fastener in the rear cover. Place an aluminum locating washer over the protruding end of the fastener (FIG 1); ensure that the round side of the washer is facing toward the hole in the primary chain case.