14
Using the Command Line Interface
Main menu
1) Configuration
2) Administration
3) Monitoring
4) Save changes to Config file
5) Help Information
6) Exit
Main -> _
1 Configuration
1) Quick Configuration
2) Interface Configuration
3) System Management
4) Policy Management
5) Back
Config -> _
1.1 Configuration > Quick Configuration
1.2 Configuration > Interface Configuration
This table shows current IP addresses.
.
.
1) Configure the Private Interface
2) Configure the Public Interface
3) Back
Interfaces -> _
1.2.1 or 1.2.2 Configuration > Interface Configuration > Configure the Private/Public Interface
1) Enable/Disable
2) Set IP Address
3) Set Subnet Mask
4) Select Ethernet Speed
5) Select Duplex
6) Back
Private/Public Interface -> _
14-8
VPN 3002 Hardware Client User Guide