Kuryakyn 6955 Installation Instructions

DELUXE NECK COVERS FOR '14-UP TOURING
Thank You For Choosing Küryakyn!
Protect yourself and others from potential injury and property damage or loss. Pay close attention to all instructions, warnings, cautions, and notices
regarding the installation, use, and care of this product.
ENSURE THAT THE FOLLOWING PARTS HAVE BEEN INCLUDED IN THE KIT:
1 Right Hand Neck Cover Assembly
1 Left Hand Neck Cover Assembly
2 Down Tube Covers
1 Down Tube Brace Cover – NOT USED ON TWIN COOLED™ MODELS
1 Left Down Tube Cover Clamp
1 Right Down Tube Cover Clamp
1 Hardware Kit Including:
4 3/8" x 1-1/2" x 1" Adhesive Foam Pad
2 5/16" Flat Washers
2 #8-32 x 1/2" Socket Head Cap Screws
2 5/16"-18 x 1-1/4" Button Head Cap Screws
1 #10-32 x 5/8" Socket Head Cap Screw
2 8" Black Cable Ties
3 4" Black Cable Ties
1 Alcohol Pad
YOU WILL ALSO NEED:
Set of Hex Wrenches, Combination Wrenches, Socket Set and Ratchet
6955-11HD-0116
THIS INDICATION ALERTS YOU TO THE FACT THAT IGNORING THE CONTENTS DESCRIBED HEREIN CAN
RESULT IN POTENTIAL DEATH OR SERIOUS INJURY.
This indication alerts you to the fact that ignoring the contents described herein may negatively affect product per-
formance and functionality or damage the product itself or the product to which it is being attached.
These installation instructions contain important information. Ensure that the end user receives this copy and is
aware of its importance for future use.
THE END USER'S SAFETY DEPENDS UPON PROPER INSTALLATION OF THIS PRODUCT. IF A STEP IN
THESE INSTRUCTIONS IS NOT WITHIN YOUR CAPABILITIES OR YOU DO NOT HAVE THE CORRECT
TOOLS, HAVE YOUR DEALER PERFORM THE PROCEDURE. IMPROPER INSTALLATION OF THIS
PRODUCT COULD RESULT IN DEATH OR SERIOUS INJURY.
ACCIDENTAL VEHICLE START-UP COULD CAUSE DEATH OR SERIOUS INJURY, REMOVE THE MAIN
FUSE BEFORE PROCEEDING.
Avoid damage to the motorcycle. Protect painted surfaces with a soft cloth or blanket.
6955
Page 1