Table 2-4 Gigabit Ethernet Module Led Descriptions - Cisco CSS11501 - 100Mbps Ethernet Load Balancing Device Hardware Installation Manual

Cabling the CSS 11503 and CSS 11506 Modules
Table 2-4
Table 2-4
LED Name
Status (left)
Status (right)
Link
Cisco 11500 Series Content Services Switch Hardware Installation Guide
2-18
describes the GEM LEDs.
Gigabit Ethernet Module LED Descriptions
Color State
Green Solid
Red Solid
Slow blink
No color Off
Amber Fast blink
Slow blink
Solid
Off
Green Off
On
Blinking
Chapter 2 Cabling and Troubleshooting the CSS
Indicates
The module is ready.
The module failed the power-up self
test during the boot process.
The module failed.
The module failed and has no power.
The module is running power-up self
test.
The module is offline and active.
The module is online and not active.
See the left status LED for indication.
There is no link.
The link exists and synchronization is
achieved.
The link is established with transmit
or receive activity.
78-13884-06