Connectivity Rules; Figure 4-3 Making Fiber Port Connections - TP-Link TL-SL5428 Installation Manual

24-port 10/100 + 4-port gigabit managed switch

Hide thumbs Also See for TL-SL5428:

Table of Contents

ONNECTIVITY

ULES

4. As a connection is made, check the Link LED on the switch

corresponding to the port to be sure that the connection is valid.

The 1000BASE-SX, 1000BASE-LX, 1000BASE-ZX fiber optic ports

operate at 1 Gbps, full duplex, with auto-negotiation of flow control. The

maximum length for fiber optic cable operating at Gigabit speed will

depend on the fiber type as listed under "1000 Mbps Gigabit Ethernet

Collision Domain" on page 4-6.

Connectivity Rules

When adding hubs (repeaters) to your network, please follow the

connectivity rules listed in the manuals for these products. However, note

that because switches break up the path for connected devices into

separate collision domains, you should not include the switch or connected

cabling in your calculations for cascade length involving other devices.

4-5

Table of Contents