Table of Contents
Troubleshooting
Related Manuals for SmartLift SL 409
Summarization of Contents
Introduction
1.1 Smartlift customer service
Contact information for Smartlift customer support and service.
1.2 Reading guide
Guidance on how to read and use the operating manual effectively.
1.3 About the manual
Explains the structure and purpose of the user and service manuals.
1.4 Machine types covered
Details the different SL and SLI models covered by this manual.
1.5 Nameplate
Explains the information found on the machine's identification nameplate.
Safety and residual risks
2.1 Safety instructions
General safety rules, prohibitions, and warnings for machine operation.
2.2 Emergencies
Procedures for handling machine emergencies like vacuum loss or overturns.
2.3 Personal protection equipment
Details required and recommended personal protective equipment (PPE).
2.4 Safety switch - Belly button
Explains the function and purpose of the belly button safety switch.
Overview and use
3.1 Machine overview
Provides an overview of the machine's components with numbered parts.
3.2 Label overview
Identifies and explains the various labels and their meanings on the machine.
3.3 Technical specifications
Lists detailed technical specifications for different Smartlift models.
3.4 Operating limits
Defines operational boundaries like materials, capacity, environment, and slope.
Operation
4.1 Before operation
Steps and checks required for pre-operation inspection of the machine.
4.2 Operation in general
Describes the typical step-by-step procedure for using the machine.
4.3 Operating functions
Explains how machine functions operate and associated potential hazards.
4.4 Signals
Details the visual and audible signals indicating machine status.
4.5 After operation
Instructions for after-operation procedures, including battery charging.
4.6 Functional overview
Provides a visual overview of control handles, buttons, and panel.
4.7 Functional description
Detailed explanation of the function and purpose of each control element.
Storage, transport, handling and lifting
5.1 Storage
Guidelines for proper storage to preserve machine condition and capacity.
5.2 Transport
Recommendations for safely transporting the machine using suitable vehicles.
5.3 Handling and lifting
Instructions for safely handling and lifting the machine using approved equipment.
Maintenance and troubleshooting
6.1 Overview of service, maintenance and lubrication intervals
Schedule and details for routine service, maintenance, and lubrication tasks.
6.2 Functional inspection
Procedures for inspecting key machine functions like vacuum system and safety features.
6.3 Cleaning the machine
Safe methods and products for cleaning the machine and its components.
6.4 Access to the electricity box – 609
Instructions on how to access the electricity box on 609 model machines.
6.5 Troubleshooting
Common problems, their causes, and recommended solutions for machine issues.
6.6 Error codes
Lists error codes and their corresponding problems and solutions.
6.7 Fuses
Details fuse types, positions, and ratings for different circuit board versions.
6.8 Tightening torques
Specifies torque values for various bolt and screw sizes used on the machine.
6.9 Spare parts
Information on how to order necessary spare parts from the manufacturer.
Dismantling of vacuum yoke and swivel joint (SL)
8.1 Dismantling of vacuum yoke (RT models)
Step-by-step guide to removing the vacuum yoke for RT model machines.
Options
9.1 Wireless remote control
Details the features, functions, and operation of the wireless remote control.
Appendix
10.1 Terms and abbreviations
Defines key terms and abbreviations used throughout the manual.
10.2 Declaration of conformity
Manufacturer's declaration of compliance with EC directives and standards.
10.3 Load charts SL
Lifting capacity charts for standard SL model configurations.
10.4 Load charts SLI
Lifting capacity charts for standard SLI model configurations.
Need help?
Do you have a question about the SL 409 and is the answer not in the manual?
Questions and answers