SL 400 RT 1 Introduction Smartlift A/S is an innovative company which develops and manufactures smart lifts, which are marketed worldwide. A Smartlift is characterized by the highest levels of precision, reliability and quality. The machines are designed to transport and install heavy window sections on construction sites and in industry so that the user does not have to perform heavy and straining manual lifting.
New maintenance personnel must be trained by an experienced colleague. 1.4 Machine types covered The user manual covers SL 400 RT. This machine is an equipment for mounting on a parent machine such as a telehandler or similar. The machine is an electric manipulator which is developed for mounting e.g.
Description Label and warnings on labels, load charts, etc., these must be replaced by new ones. New labels can be ordered from Smartlift’s customer service Loisting eye department on tel. +45 97 72 29 11 or via email: Customerservice@smartlift.com. How to replace labels: •...
Charging time for remote control battery 3 hours 82 dB (A) Sound level 85 dB (C) Expected service life 10 years Issued by: Date: Approved by: Document name.: Page 26-11-2024 USER MANUAL - SL 400 RT EN 01 6 of 27...
Permissible relative humidity (Non-condensing) From 20 % to 80 % 2.4.5 Lighting Workspace Min 200 lux Repair and maintenance work Min 500 lux Issued by: Date: Approved by: Document name.: Page 26-11-2024 USER MANUAL - SL 400 RT EN 01 7 of 27...
WARNING! Risk of explosion! • It is forbidden to use the machine in areas where there is a risk of explosion (ATEX zones). Issued by: Date: Approved by: Document name.: Page 26-11-2024 USER MANUAL - SL 400 RT EN 01 8 of 27...
ADVARSEL! Det er forbudt at anvende maskinen uden brug af sikkerhedsfodtøj og sikkerhedshjem! In addition, the following protective equipment is recommended: Gloves and earmuffs. Issued by: Date: Approved by: Document name.: Page 26-11-2024 USER MANUAL - SL 400 RT EN 01 9 of 27...
The adapter is bolted to the machine. After this, parent machines with pallet forks can use the machine. Parent machine Pallet fork adapter Issued by: Date: Approved by: Document name.: Page 26-11-2024 USER MANUAL - SL 400 RT EN 01 10 of 27...
Page 13
Below is an assembly method where the machine and parent machine are connected together with two quick-changes. The interconnection consists of Smartlift quick change and SL quick change plate with manufacturer/model specific bracket. This makes it possible to quickly switch between two different manufacturers of parent machines.
The machine must be in a horizontal position ±10°. o The machine’s alarm light must illuminate green (Sufficient vacuum obtained). Issued by: Date: Approved by: Document name.: Page 26-11-2024 USER MANUAL - SL 400 RT EN 01 13 of 27...
Monitors the vacuum level in the red vacuum circuit. Red circuit Digital vacuum meter - Monitors the vacuum level in the blu vacuum circuit. Blue circuit Issued by: Date: Approved by: Document name.: Page 26-11-2024 USER MANUAL - SL 400 RT EN 01 14 of 27...
Page 17
Alarm - Light - • YELLOW Vacuum is being rebuilding. Alarm – Light - The machine is ready for use. GREEN Issued by: Date: Approved by: Document name.: Page 26-11-2024 USER MANUAL - SL 400 RT EN 01 15 of 27...
3. press to the left: Level 3 - LED (No. 16) 3 green flashes 1. press to the right: Reset speed levels. Issued by: Date: Approved by: Document name.: Page 26-11-2024 USER MANUAL - SL 400 RT EN 01 16 of 27...
Page 19
Backward: The vacuum yoke is raised. 160° 160° Description Function Forward: The vacuum yoke is rotated clockwise. Rotation Backward: The vacuum yoke is rotated counterclockwise. Issued by: Date: Approved by: Document name.: Page 26-11-2024 USER MANUAL - SL 400 RT EN 01 17 of 27...
Page 20
Aktivate: Press one of the two buttons. Vacuum Deactivate: Press both buttons simultaneously and hold for approx. 3 sec. Issued by: Date: Approved by: Document name.: Page 26-11-2024 USER MANUAL - SL 400 RT EN 01 18 of 27...
2 LEDs illuminates RED Charging LED illuminates GREEN Storage-mode 1 LED illuminates RED Fully charged / 1 LED illuminates GREEN Storage-mode Issued by: Date: Approved by: Document name.: Page 26-11-2024 USER MANUAL - SL 400 RT EN 01 19 of 27...
Turn off the operating battery at its ON/OFF switch. • For charging of batteries during storage see section 4.6 Charging batteries. Issued by: Date: Approved by: Document name.: Page 26-11-2024 USER MANUAL - SL 400 RT EN 01 20 of 27...
Replace the batteries if the voltmeter reads less Backup batteries. than 24 volts when the batteries are fully charged. Issued by: Date: Approved by: Document name.: Page 26-11-2024 USER MANUAL - SL 400 RT EN 01 21 of 27...
Page 24
Bolt and screws necessary. Make sure the bolts and screws are secured with Loctite. Issued by: Date: Approved by: Document name.: Page 26-11-2024 USER MANUAL - SL 400 RT EN 01 22 of 27...
ATTENTION! • Suction cups should be inspected daily! • Vacuum hoses should be inspected monthly or quarterly, or as needed! Issued by: Date: Approved by: Document name.: Page 26-11-2024 USER MANUAL - SL 400 RT EN 01 23 of 27...
Let the suction cups dry at room temperature. ATTENTION! o Never direct the jet of water at the suction cups! Issued by: Date: Approved by: Document name.: Page 26-11-2024 USER MANUAL - SL 400 RT EN 01 24 of 27...
6.4 Troubleshooting ATTENTION! In case of unexpected failure or malfunctioning of the machine, the machine must be stopped immediately, and the fault must be reported to Smartlift customer service immediately via tel. +45 97 72 29 11 or via email customerservice@smartlift.com.
User Manual SL 400 RT 6.6 Spare parts If spare parts are needed, these can be ordered by contacting your nearest dealer or Smartlift Customer Service at tel. +45 97 72 29 11 or email: customerservice@smartlift.com. 7 Scrapping and disposal The machine must be scrapped and disposed of in accordance with local regulations.
Need help?
Do you have a question about the SL 400 RT and is the answer not in the manual?
Questions and answers