Power Menu - TYAN TOMCAT I815E Manual

Power Menu

In this sub screen you can configure how the BIOS handles power management. Note
that the screen shown below is has Power Management / APM enabled, which will
allow for more options to appear.
ACPI Aw are O / S
Repost Video on S3 Resume
Pow er Management / APM
Standby Tim e Out
Suspend Pow er Saving Type
Suspend Time Out
Pow er Button Mode
After G3 Enable
Green PC Monitor Pow er State Sets pow er state for green PC-compliant monitor.
Video Pow er Dow n Mode
Hard Disk Pow er Dow n Mode
Hard Disk Tim e Out (Minute)
Display Activity
Manual Throttle Ratio
S2060 Tomcat i815e
Indicates w hether or not the O / S has pow er
management capabilities. [Default is Yes ]
Sets w hether or not to repost the video on S3
pow er state (hibernation). [Default is Yes ]
Enable / disable pow er management functions.
[Default is Enabled ]
Sets time that system w ill w ait during inactivity
before the system w ill enter Standby mode. [Default
is Disabled ]
Set type of pow er saving mode for Suspend.
[Default is S1 ]
Sets time that system w ill w ait in Standby before
the system w ill enter Suspend mode. [Default is
Disabled ]
Sets how pow er button mounted externally on the
case w ill be used.
On / Off: Pow er button turns system on / off.
Suspend: Pow er button places computer in
Suspend or Full On pow er mode. [Default is On /
Off ]
Enable / disable After G3 function. [Default is
Disabled ]
[Default is Suspend ]
Sets pow er state for video subsystem. [Default is
Suspend ]
Sets w hat pow er state hard disk w ill enter after
period of inactivity. [Default is Suspend ]
Sets time that system w ill w ait before hard disk
goes into pow er saving mode. [Default is Disabled ]
Sets event monitoring on video display. [Default is
Ignore ]
Sets speed at w hich the system clock runs in
Standby mode. Setting is expressed as a
percentage betw een normal speed and speed
w hen CPU is in pow er saving mode. [Default is
50% ]
43