TYAN TOMCAT I815E Manual page 23

Note: Only Tyan-approved cables will work on this motherboard. If you are
warning
using an existing case with old cables, your system may not function properly.
Use only Tyan-approved cables.
Connecting Floppy Drives
Pin 1 on the floppy cable is usually denoted by a red or colored stripe down one side
of the cable (see Figure 2-10 below). Most of the current floppy drives on the market
require that the colored stripe be positioned so that it is right next to the power
connector. In most cases, there will be a key pin on the cable which will force you to
connect the cable properly.
S2060 Tomcat i815e
*Note: The images above is used to illustrate a concept and may not represent
the actual image of your motherboard.
Figure 2-10
1 1 1 1 1
Figure 2-9
23