Power Menu - TYAN S5372-LH User Manual

3.5 Power
These settings allow you to configure the power options for your system.
Main Advanced
Standby Timeout
Auto Suspend Timeout
Resume On Time:
Resume Time:
Power On By PCI/PCI-X
Chassis Intrusion Detect:
After Power Failure:
↑↓
F1 Help Select Item
← →
Esc Exit Select Menu
Standby Timeout
Amount of time the system needs to be in Idle Mode before entering the
Standby Mode. Standby Mode turns off various devices in the system,
including the screen, until you start using the computer again.
Off / On
Auto Suspend Timeout
Amount of time the system needs to be in Standby Mode before entering the
Suspend Mode.
Off / On
Resume On Time
When enabled, this allows the system to be worked up at a specified time. This
time is specified by the Resume Time parameter.
Off / On
Resume Time
This option allows the user to specify the time when the system is to wake up.
Power On By PCI/PCI-X
This option allows you to power on the system by PCI or PCI-X card. When
enabled, an input signal from PME on the PCI card awakens the system from a
S5 state.
Disabled / Enabled
PhoenixBIOS Setup Utility
Security Power
[Off]
[Off]
[Off]
[xx:xx:xx]
[Disabled]
[No]
[Stay Off]
-/+ Change Values
Enter Select
Sub-Menu
58
Boot Exit
Item Specific Help
Enabled wakes the
system up at a specific
time.
F9 Setup Defaults
F10 Save and Exit