Power Menu - TYAN TOLEDO I3000R Manual

3.6 Power
Use this screen to select options for the Power Settings Configuration.
Main
Resume on Time:
Resume Time:
Power Button Behavior
After Power Failure:
Chassis Intrusion Detect
S5 Wake-Up by PCI Card:
F1 Help ¡ ô ¡ õ
Esc Exit ¡ ö
Resume On Time
When enabled, this allows the system to be worked up at a specified time. This time
is specified by the Resume Time parameter.
Options: Off / On
Resume Time
This option allows the user to specify the time when the system is to wake up.
Power Button Behavior
This specifies the behavior of the system after the power button is pressed.
On/Off - This powers on / powers off the system after the power button is pressed.
Wake/Sleep - This wakes the system from/puts the system to sleep.
Options: On/Off / Wake/Sleep
After Power Failure
Sets the mode of operation if an AC/Power Loss occurs. The two modes are:
[Enabled]: restores the previous power state before loss occurred.
[Disabled]: keeps the power off until the power button is pressed.
Options: Power On / Stay Off / Last State
Chassis Intrusion Detect
This feature is used to enable/disable the function: when chassis open event is
detected, BIOS will record the event.
Options: No / Yes
S5 Wake-Up by PCI Card
If enabled, this option awakens the system from the S5 (power-off) state with an
input signal from PME on the PCI card,
Options: Enabled / Disabled
PhoenixBIOS Setup Utility
Advanced Security
Select Item
¡ ÷ Select Menu Enter
http://www.tyan.com
Power
[Off]
[00:00:00]
[On/Off]
[Last State]
[No]
[Disabled]
-/+ Change Values
Select
Sub-Menu
59
Boot Exit
Item Specific Help
Enabled wakes the
system up at a specific
time.
F9 Setup Defaults
F10 Previous Values