TYAN TOLEDO I3000R Manual page 19

JP1/JP2: SMDC/ASF2.0 Select Header
3
1
1 3
JP3: LAN3 Enable/Disable Jumper
3
1
3
1
JP6: PCI-X Speed Select Header
3 1
1
3
JP8: PCI 3.3V/5V Select Header (Reserved for OEM only)
3
1
1 3
JP16: Clear CMOS Jumper
1
3
Normal
(Default)
1
3
Clear
Pin 1-2 Closed: Enable ASF2.0 support (Default)
Pin 2-3 Closed: Enable SMDC card support
Pin 1-2 Closed: Enable LAN3 (Default)
Pin 2-3 Closed: Disable LAN3
Pin 1-2 Closed: 133MHz (Default)
Pin 2-3 Closed: 100MHz max.
Pin 1-2 Closed: select 5V (Default)
Pin 2-3 Closed: select 3.3V
Use this jumper when you have forgotten your
system/setup password or need to clear the system
BIOS settings.
How to clear the CMOS data
Power off system and disconnect the power
-
supply from the AC source
Use jumper cap to close Pin 2 and 3 for several
-
seconds to Clear CMOS
Replace jumper cap to close Pin 1 and 2
-
Reconnect the power supply to the AC source
Power on system
-
19
http://www.tyan.com